KitchenAid W10524723A warranty Cooktop USE, To Set, Ultra Power Burner Feature, Power Failure

Models: W10524723A

1 48
Download 48 pages 62.3 Kb
Page 6
Image 6

KEYPAD

FEATURE

INSTRUCTIONS

WARMING

Warming drawer

1.

Press WARMING DRAWER ON to select the Warming Drawer function at the Low setting.

DRAWER

(on some

2.

To select a higher temperature setting, press WARMING DRAWER ON a second time for the

ON/OFF

models)

 

Medium setting and a third time for the High setting.

 

 

3.Press START to begin preheating the warming drawer.

4.Allow the warming drawer to preheat for 15 minutes.

5.Place the cooked food(s) in the warming drawer

6.Press WARMING DRAWER OFF to turn off the heating element. Refer to the “Warming Drawer” section for information.

WARMING

Slow cook

DRAWER

drawer (on

SLOW COOK/OFF

some models)

 

1.Press WARMING DRAWER SLOW COOK to select the Slow Cook function at the Low setting.

2.To select a higher temperature setting, press WARMING DRAWER SLOW COOK a second time for the High setting.

3.Place the food(s) in the warming drawer.

4.Press START to begin heating the warming drawer.

5.Press WARMING DRAWER OFF to turn off the heating element.

Refer to the “Warming Drawer” section for information.

AQUALIFT SELF

AquaLift™ self-

CLEAN

clean cycle

 

 

CONTROL LOCK

Oven control

hold 3 sec. to lock

lockout

See the “Clean Cycle” section.

No keypads will function with the controls locked.

1.Check that the oven and the Timer are off.

2.Press and hold the “0” keypad for 3 seconds.

3.If enabled, a tone will sound, and “CONTROL LOCKED” will be displayed.

4.Repeat to unlock.

 

OPTIONS

Oven use

Enables you to personalize the audible tones and oven operation to suit your needs. See the

 

 

functions

“Oven Use” section.

 

 

 

 

 

 

 

 

COOKTOP USE

WARNING

Fire Hazard

Do not let the burner flame extend beyond the edge of the pan.

Turn off all controls when not cooking.

Failure to follow these instructions can result in death or fire.

Electric igniters automatically light the surface burners when control knobs are turned to LITE.

Before setting a control knob, place filled cookware on the grate. Do not operate a burner using empty cookware or without cookware on the grate.

The flame should be adjusted so it does not extend beyond the edge of the pan.

To Set:

1.Push in and turn knob counterclockwise to LITE.

All surface burners will click. Only the burner with the control knob turned to LITE will produce a flame.

2.Turn knob to anywhere between HIGH and LOW.

REMEMBER: When range is in use, the entire cooktop area may become hot.

Ultra Power™ Burner Feature

The left front burner is designed to give maximum power when fully on. It can be used to rapidly bring liquid to a boil and to cook large quantities of food.

Even-Heat™ Simmer Burner Feature

The Even-Heat™ Simmer Burner feature allows for more precise simmering and low temperature cooking. It is the right rear burner.

Power Failure

In case of prolonged power failure, the surface burners can be lit manually. Hold a lit match near a burner and turn knob counterclockwise to LITE. After burner lights, turn knob to desired setting.

6

Page 6
Image 6
KitchenAid W10524723A Cooktop USE, To Set, Ultra Power Burner Feature, Even-Heat Simmer Burner Feature, Power Failure