Maytag MD9206 warranty Press Start

Models: MD9206

1 12
Download 12 pages 40.19 Kb
Page 7
Image 7

Note: The dial can be turned in either direction to select a cycle. Once started, the dial will not advance at a specific rate during the Auto Dry cycles. At first the dial may not advance at all. Toward the end of the cycle (when the load begins to dry) the dial will advance at a more regular rate and much more quickly. This is normal operation.

Auto Dry REGULAR is designed for loads such as towels, underwear, t-shirts, jeans, etc. Set the control to the desired dryness level (more dry – less dry). The triangle symbol, , is the initial preferred setting for the majority of loads.

1

TIME DRY/AIR FLUFF may be selected for any load if the Auto Dry sensor system is not desired. Set the control to the desired number of minutes. Set the appropriate heat for drying by rotating the temperature

knob.

Step 3 Press Start

Push this button to start the dryer. The dryer door must be shut for the dryer to operate. If the door is opened during the cycle, the start button must be pushed again to resume the cycle once the door is closed.

END OF CYCLE SIGNAL

Shortly before the cycle is complete, an audible signal will sound.

6

Page 7
Image 7
Maytag MD9206 warranty Press Start