Maytag MDE9601 operating instructions Installation, Positioning the tumble dryer

Models: MDE9601

1 28
Download 28 pages 49.41 Kb
Page 17
Image 17

Installation

Positioning the tumble dryer

The tumble dryer can be positioned as freestanding or in a stack. Remember that the tumble dryer produces heat and should therefore not be located in a room that is too small. If the room is very small, drying will take longer due to the limited quantity of air.

Caution!

The machine must not be installed behind a lockable door, a sliding door or a door with hinges on the opposite side to those of the tumble dryer.

Advice!

To improve ventilation, leave the door to the room where the tumble dryer is located open.

Caution! Any electrical installation must be carried out by authorised professionals.

A. Freestanding

The tumble dryer can be positioned beside the washing machine.

B. Stacking

The tumble dryer can be placed on top of an Asko washing machine. In this case you use the stacking attachments that come with the machine:

2 foot cups. These can be found in a bag in the drum.

2 anti-tilt devices. These come attached to the bottom left corner on the back of the machine.

Extending plates can be ordered from your local retailer.

How to fit the stacker:

1. Undo the two screws indicated on the back of the washing machine.

2. Secure the anti-tilt device using the screws as shown in the picture.

3. Attach the plastic cups that will hold the tumble dryer’s front feet to the washing ma- chine’s top cover. This is essential, as once the tumble dryer’s feet are resting in the plastic cups you know the dryer is correctly positioned on the washing machine.

17

Page 17
Image 17
Maytag MDE9601 operating instructions Installation, Positioning the tumble dryer