Door hanging

The tumble dryer comes with the door hung on the left. However, it is possible to change the door to right hung.

Proceed as follows:

1. Remove the lower front plate and undo the three screws holding the hinge attach- ment.

2. Angle the lower edge of the door out to the left while turning the hinge attachment as indicated by the arrows.

Hinge attachment

5. Next you must move the plastic plugs on the upper and lower edges of the door. Use a flat screwdriver.

6. Unscrew the two screws on the sides of the door, around five millimetres, to allow the door magnet and cover washer on the inside of the door to be removed.

7. Then remove the door magnet (1) and cover washer (2).

1

3. Move the hinge pin. For right hanging, the hinge attachment must then be turned upside down.

Hinge pin

4. Then move the hinge pin in the panel’s lower edge.

2

8. Insert the door magnet in place of the cover washer.

22

Page 22
Image 22
Maytag MDE9601 operating instructions Door hanging, Proceed as follows