Maytag MDG30MNV, MDG30PNH installation manual Procedure for Functional Check Replacement Components

SECTION VIII

PROCEDURE FOR FUNCTIONAL CHECK

OF REPLACEMENT COMPONENTS

1.Microprocessor Controller (Computer) Board

a.Upon completing installation of the replacement microprocessor controller (computer) board, reestablish power to the dryer.

b.Start the drying cycle by pressing any of the preset cycles in letters A-F.

c.Verify that the applicable indicator lights on the back side of the microprocessor controller (computer) board are lit. (Refer to the illustration below.)

113307 - 7 Maytag Co. 27