Maytag MEC7430W dimensions Cleaning the spray arm and filter plate

30User maintenance instructions

	Cleaning the spray arm and filter plate
	To remove and clean the spray arm and filter plate
1	Unplug the DishDrawer or turn it off at the power	2
	supply.
2	Unclip the glass supports from the rack wires and
	fold all the adjustable racks away, so that they
	are upright and close to the top.
3	Remove the base rack carefully. Lift from the back
	end first to prevent knocking the detergent and
	rinse aid dispenser.

4Lift the spray arm and shake any foreign material out.

Rinse it clean under running water and wipe with a damp cloth.

5Lift and remove the drain filter.

4

5

1

3

6In the centre of the filter plate there are two rings. Turn the outer ring anticlockwise, about a 1/8

turn. This will release the filter plate.

7Lift the filter plate out. Remove any foreign material, wash in hot soapy water and rinse thoroughly in clean water, then wipe with a damp cloth. Take care handling the sharp outer edge of the filter plate.

6

7

Turn outer ring 1/8 turn