Maytag MEC7430W dimensions Fault codes

		Fault codes	35
Fault codes	Possible causes	What to do
F1	Flood switch has been	Turn off the water supply to the
	activated.	DishDrawer® and call your Authorised
		Service Centre or Customer Care.

F2

Motor problem.	Call your Authorised Service Centre or
	Customer Care.

F3

Temperature sensor	Ensure water coming in through the inlet
failed.	hose is less than 65 oC. You may need to
	install a tempering valve on your water
	supply.

F4

Faulty temperature	Call your Authorised Service Centre or
sensor or element.	Customer Care.

F5

Lid fault.	Plug the DishDrawer back in or turn it on
	at the power supply. Fault may reset.

F6

Lid fault.	Plug the DishDrawer back in or turn it on
	at the power supply. Fault may reset.

F7

Lid fault.	Plug the DishDrawer back in or turn it on
	at the power supply. Fault may reset.

F9

Electronics	Call your Authorised Service Centre or
malfunction.	Customer Care.