Maytag MEC7430W dimensions User maintenance instructions

O-ring (some models only)

User maintenance instructions

31

To replace the filter plate and spray arm 8 Some models only: Before replacing the filter

plate, ensure the O-ring is correctly positioned on the motor assembly, as shown.

9 Orientate the filter plate and lower it into place: make sure its kidney-shaped hole aligns with

the matching recess in the DishDrawer base. 10 Ensure the filter plate lies flat in the base, then

lock it into position: turn the outer ring clockwise

until the the marks align with each other and all three pin pairs firmly interlock, as shown.

Important!

The filter plate must not be able to move about freely.

Alignment marks 10

9

Inter- locking pin

Outer ring

11Replace the drain filter, ensuring it is flush with the filter plate.

12Replace the spray arm back onto the impeller.

12 11

13Replace the base rack, lowering its front edge into position first.

14Plug the DishDrawer back in or turn it on at the power supply.

Note: Where there is broken crockery or glass in the drawer, it must be carefully removed to prevent damage to the DishDrawer.