Maytag MER5710, MER5530, MER5550, MER5750, MER5730 warranty Oven Light, Storage Drawer, Leveling Legs

Oven Light

ACAUTIONS:

. Disconnect power to range before replacing light bulb.

. Use a dry potholder to prevent possible harm to hands

when replacing bulb.

. Be sure bulb is cool before touching bulb.

•Donottouchhotbulbwithadampclothasthismaycause the bulb to break.

To replace oven light bulb:

1. When oven is cool, hold bulb cover in place, then slide wire retainer off cover. NOTE: Bulb cover will fall if not held in

	place while removing wire		8vLBCOVER
2.	retainer.			_
	Remove bulb cover and
	light bulb.	-///_	_-J//2zz._(_J_	)/
3.	Rep!acewitha40watt	_	___/_
	apphance bulb.	_	_
4.	Replace bulb cover and		_Er_m_

secure with wire retainer.

5. Reconnect power to range. Reset clock.

Storage Drawer

ACAUTION:

•Do not store plastic, paper products, food or flammable materials in this drawer. The drawer

may become too warmfor these items when the oven is in use.

The storage drawer can be removed to allow you to clean under the range.

To remove:

1. Empty drawer and pull out to the first stop position.

2. Lift up the front of the drawer.

3. Pull out to the second stop position.

4. Grasp sides and lift drawer up and out.

To replace:

1.Fit the ends of the drawer glides into the rails in the range.

2.Lift up front of drawer and gently push in to the first stop position.

3.Liftdrawerupagainandpushuntildrawerisclosed.

Leveling Legs

ACAUTION:

. Be sure the anti-tip bracket secures one of the rear leveling legs to the floor to prevent the range from accidentally tipping.

The range should be leveled when installed. If the i_

range is not level, turn the plastic leveling legs, Jll_ .'/

located at each corner of the range, untilrangej/J//_,_,(')

J ";;;'" _ RACKEr

LEVELt_ LEG

20