Oven Light Storage DrawerACAUTIONS:ACAUTION:
. Disconnect power to range before replacing lightbulb. • Do not storeplastic, paper products, foodor
flammable materials in thisdrawer.The drawer
. Use a dry potholder to prevent possible harmtohandsmay become too warmfor these items when the
whenreplacing bulb. oven isinuse.
. Be surebulbiscool before touching bulb. The storagedrawer can be removed toallow you to
• Donottouchhotbulbwithadampclothasthismaycause clean under the range.
the bulbtobreak.To remove:
1.Empty drawer and pull out to the first stop position.
To replace oven light bulb: 2. Lift upthe front of thedrawer.
1.When oven iscool, hold bulb cover inplace, thenslide wire
retainer off cover. NOTE:Bulb cover will fall if not held in 3.Pull out to the second stop position.
place while removing wire 8vLBCOVER 4. Grasp sides and lift drawer up and out.
retainer.
2. Remove bulb cover and _ To replace:
light bulb. -///_ _-J//2zz._(_J_/) 1. Fit the ends ofthe drawer glides into the railsin the
3. Rep!acewitha40watt _ ___/_ range.
apphance bulb. _ _ 2. Lift up front of drawer and gently push in to the first
4. Replacebulb cover and _Er_m_ stop position.
secure with wire retainer. 3. Liftdrawerupagainandpushuntildrawerisclosed.
5. Reconnect power to range. Reset clock.
Leveling LegsACAUTION:
. Be sure the anti-tip bracketsecures one of the rear
leveling legs to the floor to prevent the range from
accidentally tipping.
The range should be leveled when installed. If the i_
range is not level, turn the plastic leveling legs, Jll_ .'/
located at each corner of the range, untilrangej/J//_,_,(')
J ";;;'" _RACKEr
LEVELt_LEG
20