Providing local codes permit, power to the dryer can be made by use of a flexible U.L. listed power cord/pigtail (wire size must conform to the rating of the dryer), or the dryer can be hard wired directly to the service breaker panel. In both cases, a strain relief must be installed where the wiring enters the dryer.
ELECTRIC SERVICE SPECIFICATIONS (per Tumbler)
A seperate circuit breaker must be provided for each tumbler/pocket.
NOTES: Circuit breakers are thermal magnetic (industrial) type ONLY. For others, calculate/verify correct breaker size according to appliance amp draw rating and type of breaker used.
SERVICE |
| WIRE | APPROX. | MINIMUM | CIRCUIT | |
PHASE | AMP | |||||
VOLTAGE | SERVICE | WIRE SIZE* | BREAKER | |||
| DRAW | |||||
|
|
|
|
| ||
|
|
|
|
|
| |
120 | 1Ø | 2 | 9.0 | 12 | 15 | |
|
|
|
|
|
|
* AWG Stranded Type Wire ... for individual lengths less than 100 feet.
NOTE: Contact factory for electrical information not listed.
NOTE: Manufacturer reserves the right to make changes in specifications at any time without notice or obligation.
18
