Maytag RST2200, RST2400 warranty Operating the Controls, Adjusting the Temperature

OPERATING THE CONTROLS

FREEZER		REFRIGERATOR
I	D-INITIASETTINGL	6-INITIALSETTING	I
	G.GOLUFE3q'INGT	II-COLOSEITtNGST

Initial Setting of Controls

Freezer Control: This control has settings from A (warmest) to G (coldest). Initially set this eontrol to

D.

NOTE. The coldest freezer , _ttmg ,(G) !s 1

recommended for short term use only,

, , ". : ' :° " [ [

Refrigerator Control, This control has settings from 1 (warmest) to 11 (coldest). Initially set this control to

6. The refrigerator may" rnn for several hours when yon

first start it. This is normal.

Let the refrigerator run at least 8 to 12 hours before adding food• A day or so after adding food, you may decide one or both compartments should be colder

or warme_: If so, adjust the control(s) as instrncted below.

Adjusting the Temperature

Controls

Except when starting the refrigerator, do not change either control more than one number or letter at

a time. Allow '24 hours for the temperature to stabilize before resetting. Changing either control will have

some eft_et on the temperature of the other compartment.

Freezer too warm--Torn the freezer control to

the succeeding letter. For example, tuna the control from D to E.

Freezer too cold--Turn the freezer control to the preceding letter. For example, turn the control from D to C.

Refrigerator too warm--Turn the refrigerator

control to the next higher number. For example, torn the control from 6 to 7.

Refrigerator too eold--Tnrn the refrigerator control to the next lower number. For example, turn the control from 6 to 5.

Warm Cabinet Surfaces

Some portions of the cabinet may be warm to the touch. This is a normal tkmction of the refrigerator which helps prevent moisture from condensing on the

you first start your refrigerator, during hot weather and aftercabinetexcessive.Thisconditionorlengthy_x411bedooropeningsmorenoticeable. when

ADJUSTINGTHE INTERIOR

Cantilever Shelves

The refrigerator shelves are adjustable, all_wing you to arrange the shelving to t_t your family_ food storage

needs. Never attempt to adjust a shelf that is loaded with food.

To remove the refrigerator shclfl

1.Grasp the shelf at the front with one hand and push up under the shelf back with the other hand.

2.Lift the shelf straight out.

To rcplaee the refrigerator shelf:

I, Keep the shelf horizontal. Guide dm tabs into the slots in the shelf support at the back of the cabinet.

2. Lower the shell" until the tabs lock into position. Be sure the shelf is secure before loading it with fi)od.

Freezer Shelves

The freezer shelves can be removed or adjusted to accommodate large size packages and fbr cleaning.

PAGE 3