ICE AND WATER SERVICE
Automatic Ice Maker
ltere are some thi_lgs to keep in mind about the automatic ice maker's operation:
•After your refrigerator has been hooked up to the water supply, move the wire lever arm into the down position. This will start its operation. The ice maker will fill with water x_en the freezer reaches the
proper temperature. With a newly installed refrigerator this could take up to '24 hours.
•Discard all the cubes t_om the first two or three batches made. These initial hatches of'ice cubes may he irregular in shape and discolored.
•When the ice cubes are ejected it is normal for several cubes to be joined together at the ends. They can easily be broken apart. The ice maker will contiuue to make ice until the supply of ice cubes raises the wire lever arm, shutting the ice maker off.
•To manually stop the operation of the ice maker, moxe the wire lever arm into the up position.
•Certain sounds mar"accompany the various operating cycles of the ice maker:
buzzing of the water valve
•If the ice is not used frequently the ice cubes will become cloudy, shrink stick together and taste stale. Empty the ice storage bin periodically and wash it in lukewarm water. Be sure to dry tile bin hefbre replacing it or the ice cubes will stick to the metal auger.
•To remove the ice hin. lift the front of the bin and pull forward. To avoid the ice maker dumping ice while
the bin is removed, turn the ice maker off by lifting the wire lever.
•To replace the ice bin, reverse the above procedure. Turn the ice maker on by lowering the wire arm.
•Beverage and foods should not be placed in the ice storage bin for quick chilling. These items can block
the wire lever arm, causing the ice maker to malfimction.
Automatic Ice and Water
Dispenser
The antomatic ice and water dispenser offers a variety of convenience features. These are outlined as follows:
t'_MAY,a_
..........
,_........... I I
