CARE AND CLEANING
Refer to the chart on page 13 when cleaning the reffig- erator.
CAUTION: Disconnect the power cord before
cleaning. Also, do not touch refrigerated surfaces with wet or damp hands. Damp objects stick to the cold metal surfaces. Before cleaning the freezer, allow it to warm up. Allow glass shelves to warm up before immersing in warm water.
Cleaning Under the Refrigerator
Your refrigerator can be rolled out }br cleaning the floor underneath. Simply unlock the front roller locks (see
page 1). Pull the refrigerator straight out from the walh
Cleaning the Defrost Pan
The defrost water drains into a shallow pan beneath the cabinet and evaporates. This pan should be cleaned periodically with warm sudsy water.
To remove the defrost pan:
I. Remove the base grille (see page 1).
2.Lit} the pan up and pull out. To replace the defrost pan:
1.Position the side flanges to fit over the slide rails and press down on the center of tile pan to snap in place.
2.Replace the base grille,
',
"'"',
Replacing the Interior Lights
CAUTION: | Disconnect | the |
| 1 | |
|
| ||||
replacing | light | bulb(s)• | power | cord before | [ |
Wear glo_es | _s px0tection | ||||
• | . |
|
| , |
|
against possible | broken | g_asg |
| / | |
Refrigerator
Two upper li_41tsare located behind, the full width li_ht_, shield at the top back of the refrigerator compartment,
A lower rel)igeratur light is located behind the Meat/Cheese drawer on select models.
To replace the upper refrigerator bulbs:
1.Unplug the refrigerator.
2.Remove the light shield by grasping the bottom of the shield at each end and pull fb]ward to remove.
3.Lift up and remove the shield.
4.Unscrew the bulb and replace with a 40 watt appli- anee bulb.
5.Replace the light shield by hooking the top of the shield over the plastic pins. Secure the bottom of the
shield by pushing in on middle edges of the shield at both ends.
To replace the lower refrigerator bulb:
1. Unplug the ref3"igerator.
'2. Remove the Meat/Cheese drawer
3.Using twu hands, spread the top and bottom of tile light shield vertically away from each other and pull to tile front to remove.
4.Unscrew the bulb and replace with a 40 watt show- case bulb.
5.Using two bands, spread the top and bottom of the light shield and push it into plaee, engaging the tabs into tile slots.
6.Replace the Meat/Cbeese drawer.
Freezer
The t_ceezer light is located in tile upper portion of the freezer compartment.
To replace the freezer bulb:
1.Unplug tile refrigerator.
2.Remove the ice bin (see page 9) and the freezer shelf (see page 5).
3.Unhook tile tabs on the top of the light shield by pressing in with )xmr thumb on the center top of the light shield. Pivot the shield down.
4.Unscrew the bulb when cool and replace it with a standard 40 watt appliance bulb.
5.Pivot tile shield up into place, snapping the tabs into the slots. Replace the freezer shelf and ice bin.
Ice and Water Dispenser
To replace the dispenser bulb: 1. Unplug the refrigerator.
2. Reach up behind the decorative panel on the right
side, unscrew tile bulb and replace it with a 7 watt appliance bulb.
PAGE 11
