UXT3030AA SERIES

UXT4030AA

SERIES

UXT3036AA

UXT4036AA

 

product visit

ECONOMY RANGE HOOD UXT2036AA SERIES

To register this

 

UXT2030AA

www.broan.com INSTALLATION INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

! INTENDED FOR DOMESTIC COOKING ONLY. !

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

1.Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer at the address or telephone number listed in the warranty.

2.Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

3.Installation work and electrical wiring must be done by a qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction codes and standards.

4.Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent backdrafting. Follow the heating equipment manufacturer's guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.

5.When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

6.Ducted fans must always be vented to the outdoors.

7.Do not use this range hood with an additional speed control device.

8.To reduce the risk of fire, use only metal ductwork.

9.Use with approved cord-connection kit only.

10.This unit must be grounded.

TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

1.Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings.

2.Always turn hood ON when cooking at high heat or when cooking flaming foods.

3.Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter.

4.Use proper pan size. Always use cookware appropriate for the size of the surface element.

WARNING

TO REDUCE THE RISK OFINURY TO PERSONS IN THE EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING:*

1.SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.

2.NEVER PICK UP A FLAMING PAN - You may be burned.

3.DO NOT USE WATER, including wet dishcloths or towels - a violent stream explosion will result.

4.Use an extinguisher ONLY if:

A.You know you a Class ABC extinguisher and you already know how to operate it.

B.The fire is small and contained in the area where it started.

C.The fire department is being called.

D.You can fight the fire with your back to an exit.

*Based on “Kitchen Firesafety Tips” published by NFPA.

CAUTION !

1.For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.

2.To avoid motor bearing damage and noisy/and or unbalanced impellers, keep drywall spray, construction dust, etc. off power unit.

3.For best capture of cooking impurities, your range hood should be mounted 18-24" above the cooking surface.

4.Please read specification label on product for further information and requirements.

TOOLS AND MATERIALS REQUIRED

‰Drill, electric or ratchet drive

‰1/8" drill bit for drilling pilot holes

‰1-1/4" wood bit for drilling electrical wiring access hole

‰One straight blade and one phillips head screwdriver

‰Pliers

‰Pencil and ruler and/or tape measure

‰Saber saw or keyhole saw for cutting 1" x 2" wood strips to length and cutting wall or cabinet openings

‰Caulking, metal snips, duct tape, duct (with elbows and transition, if necessary) and roof or wall cap, as required

‰Electrical wiring and supplies of type to comply with local codes

The following materials are required only for installations on recessed bottom kitchen cabinets:

‰Two 1" x 2" x 12" (approximate length) wood strips (pur- chase locally)

‰Four 1-1/4" long flat head wood screws (purchase locally)

INSTALLER: Leave This Manual With Homeowner HOMEOWNER: Use and Care Information on Page 6

Page 1
Image 1
Maytag UXT4030AA, UXT2030AA, UXT3030AA, UXT3036AA, UXT2036AA installation instructions Read and Save These Instructions

UXT4036AA, UXT2036AA, UXT3036AA, UXT3030AA, UXT4030AA specifications

The Maytag UXT2030AA, UXT4030AA, UXT3030AA, UXT3036AA, and UXT2036AA are an impressive range of under-cabinet ventilation hoods designed to enhance kitchen performance while adding a sleek, modern touch. These models boast a blend of powerful functionality, innovative technology, and aesthetic appeal.

One of the standout features of these Maytag models is their powerful ventilation capabilities. Equipped with high-performance motors, they efficiently eliminate smoke, steam, and cooking odors, ensuring a fresh atmosphere in the kitchen. The UXT4030AA, with its robust airflow, is ideal for larger kitchens or frequent cooking, while the UXT2030AA, with a slightly lesser capacity, suits smaller spaces without compromising on efficiency.

User-friendly controls are a hallmark of these hoods. The push-button controls on these models allow for easy operation, enabling users to select from multiple fan speeds to adjust ventilation based on cooking intensity. The integrated lighting feature is another practical aspect. With bright bulbs, the hoods illuminate the cooking surface, providing optimal visibility during meal preparation.

In terms of design, the Maytag under-cabinet hoods showcase a polished, stainless-steel finish that complements various kitchen styles. Their streamlined profiles fit seamlessly into cabinetry, creating a sophisticated look without being obtrusive. The UXT3030AA and UXT3036AA come with a slightly larger width, accommodating a broader range of kitchen layouts and cooking appliances.

The installation of these hoods is straightforward, compatible with standard under-cabinet placements, making them ideal for both new builds and remodels. Moreover, they feature dishwasher-safe aluminum grease filters that ensure easy maintenance and cleanliness, contributing to the longevity of the appliance.

With Whisper Quiet technology, these hoods offer a quieter operation compared to many other models, allowing for pleasant cooking experiences and conversation-friendly environments. This feature is particularly beneficial in open-concept spaces where kitchen and living areas blend.

In summary, the Maytag UXT2030AA, UXT4030AA, UXT3030AA, UXT3036AA, and UXT2036AA under-cabinet ventilation hoods combine high efficiency and attractive design with user-centric features. With powerful ventilation, easy controls, ample lighting, and a focus on quiet operation, they are excellent choices for those looking to enhance their kitchen experience.