IMPORTANT SAFETY INSTRUCTIONS

WARNING: When using the dishwasher, follow basic precautions, including the following:

■Read all instructions before using the dishwasher.

■Use the dishwasher only for its intended function.

■Use only detergents or rinse agents recommended for use in a dishwasher, and keep them out of the reach of children.

■When loading items to be washed:

1)Locate sharp items so that they are not likely to damage the door seal; and

2)Load sharp knives with the handles up to reduce the risk of cut- type injuries.

■Do not wash plastic items unless they are marked “dishwasher safe” or the equivalent. For plastic items not so marked, check the manufacturer's recommendations.

■Do not touch the heating element during or immediately after use.

■To avoid electrical shock hazard, the sides and back must be enclosed and the front panels must be attached before electrical power is applied to the dishwasher. Refer to the installation instructions for proper grounding procedures.

■Do not tamper with controls.

■Do not abuse, sit on, or stand on the door, lid, or dish racks of the dishwasher.

■To reduce the risk of injury, do not allow children to play in or on the dishwasher.

■Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the dishwasher turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

■Remove the door or lid to the washing compartment when removing an old dishwasher from service or discarding it.

SAVE THESE INSTRUCTIONS

GROUNDING INSTRUCTIONS

■For a grounded, cord-connected dishwasher:

The dishwasher must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. The dishwasher is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.

WARNING: Improper connection of the equipment- grounding conductor can result in a risk of electric shock.

Check with a qualified electrician or service representative if you are in doubt whether the dishwasher is properly grounded. Do not modify the plug provided with the dishwasher; if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

■For a permanently connected dishwasher:

The dishwasher must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the dishwasher.

SAVE THESE INSTRUCTIONS

WARNING

Tip Over Hazard

Do not use dishwasher until completely installed. Do not push down on open door.

Doing so can result in serious injury or cuts.

2

Page 1 Page 3
Page 2
Image 2
Maytag W10157789A warranty For a grounded, cord-connected dishwasher, For a permanently connected dishwasher
Page 1 Page 3

W10157789A specifications

The Maytag W10157789A is a highly regarded appliance accessory designed to optimize the performance of your Maytag clothes dryer. This replacement lint filter is engineered to capture lint and debris from your garments, ensuring that your dryer operates efficiently and safely. By utilizing this component, you not only prolong the life of your dryer but also enhance the drying process, saving both time and energy.

One of the standout features of the W10157789A is its robust design. Constructed from high-quality materials, this lint filter is built to endure the conditions of everyday use while maintaining its functionality. The mesh screen effectively captures lint particles while allowing for optimal airflow, which is crucial for efficient drying. A well-functioning lint filter also helps to prevent potential fire hazards that can arise from accumulated lint in dryer vents.

In terms of technology, the W10157789A reflects advancements in home appliance design aimed at improving user experience and safety. Its easy-to-install design ensures that homeowners can replace the filter without needing specialized tools or assistance. This user-friendly approach resonates with Maytag’s commitment to customer satisfaction and ease of maintenance.

The lint filter also features a sleek and modern aesthetic, making it a practical addition to your dryer setup. Its compatibility with several Maytag dryer models broadens its appeal, allowing various users to benefit from its efficiency. Moreover, the filter is designed to be easily cleaned, promoting regular maintenance practices that keep your dryer functioning optimally and your laundry room safe.

An important attribute of the W10157789A is its contribution to energy efficiency. By effectively trapping lint, this filter ensures that your dryer doesn’t have to work harder than necessary, thereby conserving energy and reducing utility costs. It complements the eco-friendly features of many Maytag appliances, making it an ideal choice for environmentally conscious consumers.

In summary, the Maytag W10157789A is more than just a replacement part; it embodies a dedication to safety, efficiency, and user convenience. Whether you are a first-time homeowner or a seasoned appliance user, investing in this lint filter is a practical decision that pays dividends in dryer performance and longevity.
Top Page Image Contents