OPTION SELECTIONS
| OPTIONS | DISH LOAD TYPES | DESCRIPTIONS | USE WITH: | |
|
|
|
|
|
|
|
|
| For best drying results, dry | Turn OFF when loads contain plastic dinnerware that may be | Heavy Wash, Normal |
|
|
| |||
|
|
| dishes with heat. | sensitive to high temperatures. | Wash, China/Crystal, |
|
|
|
| This option with the use of rinse aid will provide the best | Insta Wash or Sensor |
|
|
|
| ||
|
|
|
| Clean cycles | |
|
|
|
| drying performance. | |
|
|
|
|
| |
|
|
|
|
|
|
|
|
| To sanitize your dishes and | Raises the water temperature in the final rinse to | Heavy Wash, Normal |
|
|
| |||
|
|
| glassware in accordance | approximately 154°F (68°C). This high temperature rinse | Wash, Light Wash, |
|
|
| with NSF/ANSI Standard | sanitizes your dishes and glassware in accordance with | China/Crystal or Sensor |
|
|
| 184 for Residential | NSF/ANSI Standard 184 for Residential Dishwashers. | Clean cycles |
|
|
| |||
|
|
| Dishwashers. | Certified residential dishwashers are not intended for |
|
|
|
|
| licensed food establishments. |
|
|
|
|
| The Sanitize option adds heat and time to the cycle. |
|
|
|
|
|
|
|
|
|
| Loads containing tough, | Increases the target water temperature during the wash | All cycles, except Rinse |
|
|
| |||
|
|
| portions of the cycle. | Only and Insta Wash | |
|
|
|
| Adds heat, wash time and water to the cycle. |
|
|
|
|
|
|
|
Use for loads with tough food soil.
Depending on which cycle is being used, adds heat and/or | Heavy Wash or Normal |
wash time to the cycle. | Wash |
|
| Use for loads with normal | Raises temperature in the final rinse to 160°F (71°C). | All cycles, except Quick |
|
| |||
|
| amounts of food soil. |
| Wash and Rinse Only |
|
|
|
|
|
|
|
|
|
|
Use for loads with normal amounts of food soils; specialized option for stemware and glass cleaning.
Provides deep clean and shine by adding steam to the cycle. All cycles, except Rinse
Raises the water temperature in the final rinse to | Only and Insta Wash |
| |
approximately 154°F (68°C). |
|
To run your dishwasher at a later time or during off- peak hours.
Delays the start of a cycle up to 9 hours. | All cycles, except Rinse |
Select a wash cycle and options. Press Delay. Press Start/ | Only |
| |
Cancel. Close the door firmly. |
|
Control Lock To avoid unintended use of
your dishwasher, or cycle
and option changes during a cycle.
To turn on Lock, press and hold Heated Dry for at least | Anytime |
3 seconds. |
|
To turn off Lock, press and hold Heated Dry for at least |
|
3 seconds. |
|
When Control Lock is lit, all buttons are disabled. If you press |
|
any pad while your dishwasher is locked, the light flashes |
|
5 times. The dishwasher door can be opened while the |
|
controls are locked. |
|
IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle will automatically compensate by adding time, heat and water as needed.
CONTROLS AND
CYCLE STATUS
CONTROL PURPOSE | COMMENTS |
To start or resume a wash cycle
If the door is opened during a cycle or the power is interrupted, all lights will flash to indicate suspended cycle. The cycle will not resume until the door is closed.
To follow the progress and status of your dishwasher cycle
Clean indicator glows when a cycle is finished.
If you select the Sanitize option, when the Sanitize cycle is finished, the Sanitized indicator glows. If your dishwasher did not properly sanitize your dishes, the light will not come on. This can happen if the cycle is interrupted, or the water could not be heated to the required temperature. The clean and sanitize lights go off when the door has been opened for more than 30 seconds or the CANCEL key is pressed.
6
