The refrigerator seems noisy

Refrigerator noise has been reduced over the years. Due to this reduction, you may hear intermittent noises from your new refrigerator that you did not notice from your old model. Below are listed some normal sounds with explanations.

Buzzing - heard when the water valve opens to fill the ice maker

Pulsating - fans/compressor adjusting to optimize performance

Hissing/Rattling - flow of refrigerant, movement of water lines, or from items placed on top of the refrigerator

Sizzling/Gurgling - water dripping on the heater during defrost cycle

Popping - contraction/expansion of inside walls, especially during initial cool-down

Water running - may be heard when ice melts during the defrost cycle and water runs into the drain pan

Creaking/Cracking - occurs as ice is being ejected from the ice maker mold.

The doors will not close completely

Door blocked open? Move food packages away from door.

Bin or shelf in the way? Push bin or shelf back in the correct position.

The doors are difficult to open

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Gaskets dirty or sticky? Clean gaskets and contact surfaces with mild soap and warm water. Rinse and dry with soft cloth.

Temperature and Moisture

Temperature is too warm

New installation? Allow 24 hours following installation for the refrigerator to cool completely.

Door(s) opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep doors fully closed.

Large load of food added? Allow several hours for refrigerator to return to normal temperature.

Controls set correctly for the surrounding conditions? Adjust the controls a setting colder. Check temperature in 24 hours. See “Using the Control(s).”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

Humid room? Contributes to moisture buildup.

Door(s) opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep doors fully closed.

Ice and Water

The ice maker is not producing ice or not enough ice

Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

Freezer door closed completely? Firmly close the freezer compartment door. If the freezer compartment door will not close all the way, see “The doors will not close completely,” earlier in this section.

Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice volume improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

Water shutoff valve not fully open? Turn the water shutoff valve fully open.

Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice quality improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

Questions remain regarding water pressure? Call a licensed, qualified plumber.

16

Page 16
Image 16
Maytag W10208789A, W10208790A, MBL2258XES installation instructions Temperature and Moisture, Ice and Water

MBL2258XES, W10208789A, W10208790A specifications

The Maytag W10208790A and W10208789A are two innovative refrigerator models that exemplify the brand's commitment to quality and performance. Designed to cater to modern households, these models offer a perfect blend of style, functionality, and advanced technology.

One of the main features of these Maytag refrigerators is their spacious interior. The MBL2258XES model boasts a generous capacity, providing ample storage space for groceries and frozen items. The adjustable shelves and door bins allow for customized storage solutions, making it easier to organize food items effectively. Additionally, the humidity-controlled crisper drawers help maintain optimal freshness for fruits and vegetables, prolonging their shelf life.

The W10208790A and W10208789A refrigerators are equipped with advanced cooling technologies. The dual cooling system ensures that both the refrigerator and freezer compartments maintain consistent temperatures. This not only prevents odors from transferring between the two sections but also enhances energy efficiency. The advanced compressor technology further optimizes cooling, allowing for rapid temperature adjustments in response to changes in the internal environment.

Another standout feature is the Ice Maker System, which provides a steady supply of ice on demand. The Ice Maker is designed for ease of use and convenience, making entertaining and meal preparation a breeze. Additionally, the models come with an optional water filter system, ensuring that the water and ice are clean and refreshing.

In terms of design, the MBL2258XES offers a sleek and modern appearance, available in various finishes to complement any kitchen décor. The stainless steel option provides a professional look, while other finishes give homeowners the flexibility to choose a style that best suits their space. The solid construction of these refrigerators ensures durability and reliability, hallmarks of the Maytag brand.

Energy efficiency is another critical characteristic of the Maytag W10208790A and W10208789A models. They are designed to reduce energy consumption, contributing to lower utility bills and a more sustainable household. The Energy Star certification reflects their commitment to environmental responsibility while retaining high-performance standards.

In conclusion, the Maytag W10208790A, W10208789A, and MBL2258XES refrigerators combine innovative features, performance-enhancing technologies, and stylish design to meet the demands of today's consumers. From ample storage and advanced cooling systems to energy efficiency and a sleek aesthetic, these models are engineered for lasting satisfaction.