Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2" (5.08 cm) minimum on each side (depending on your model) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.

1/2" (1.25 cm)

2" (5.08 cm)

NOTES:

It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install in a location where the temperature will fall below 55°F (13°C).

Normal minimum cabinet cut-out width required for product installation is 36" (91.44 cm). However, if the product is placed against an extended wall and the ability to remove the crisper pans is desired, an additional 18" (45.72 cm) of cabinet width is required, so a total cabinet opening width of 54" (137.16 cm) is recommended.

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting. See “Using the Controls.”

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

TOOLS NEEDED:

Flat-blade screwdriver

¹⁄₄" Nut driver

⁷⁄₁₆" and ¹⁄₂" Open-end or two

¹⁄₄" Drill bit

 

adjustable wrenches

Cordless drill

 

 

NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄"

(6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or ³⁄₁₆"

(4.76 mm) saddle valve which reduces water flow and clogs more easily.

IMPORTANT:

All installations must meet local plumbing code requirements.

Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

3

Page 3
Image 3
Maytag W10214490A Location Requirements, Electrical Requirements, Water Supply Requirements, Recommended Grounding Method

W10214490A, W10214491A specifications

The Maytag W10214491A and W10214490A are pivotal components designed to enhance the functionality and efficiency of various Maytag appliances. These parts, which primarily serve as replacement components for dishwashers, are engineered for durability, performance, and ease of installation, making them essential for maintaining the optimal operation of your home appliance.

The W10214491A is a high-quality dishwasher door latch. This essential part ensures the dishwasher door securely closes, preventing leaks and ensuring safe operation during cycles. Its robust construction stands up to the rigors of daily use, while the exact fit and design help maintain the dishwasher's overall performance. The door latch is crafted from premium materials resistant to wear and tear, providing long-lasting reliability.

On the other hand, the W10214490A is a compatible replacement part for the door latch assembly. It integrates seamlessly with various Maytag dishwasher models, ensuring a secure and proper fit that facilitates optimal door function. This unit is designed with user-friendly installation in mind, often requiring just a few tools and minimal technical skills. By using this part, homeowners can avoid the costs associated with professional repairs while enjoying the satisfaction of performing their repair work.

Both models reinforce Maytag's commitment to superior engineering. These products embody the brand's focus on quality, ensuring that every appliance part is built to last. An important characteristic of these parts is their compatibility with a range of Maytag dishwashers, allowing for versatility in repair options. This adaptability is crucial for appliance owners looking to maintain reliability without investing in a new unit.

In addition to their functional benefits, these parts reflect Maytag's dedication to energy efficiency and sustainable practices. By prolonging the life of existing appliances through high-quality replacements, you contribute to reducing waste and energy consumption, promoting an eco-friendly approach to home maintenance.

In conclusion, the Maytag W10214491A and W10214490A represent quality and reliability in appliance repair. With features designed for durability, easy installation, and compatibility with various models, these components are vital for homeowners seeking to maintain their dishwashers efficiently. Investing in these parts not only ensures appliances run smoothly but also promotes a sustainable approach to appliance ownership.