Wait 24 hours before you put food into the refrigerator. If you add food before the refrigerator has cooled completely, your food may spoil.

NOTE: Adjusting the Refrigerator and Freezer Controls to a higher (colder) than recommended setting will not cool the compartments any faster.

Adjusting Controls

Give the refrigerator time to cool down completely before adding food. It is best to wait 24 hours before you put food into the refrigerator. The settings indicated in the previous section should be correct for normal household refrigerator usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.

Rotary Controls: Turn the control right (clockwise) to make the compartment colder. Turn the control left (counterclockwise) to make it less cold. To turn the cooling system off, turn the Refrigerator Control counterclockwise until it reaches the OFF position.

Slide Controls: Slide the control one setting to the right to make the compartment colder. Slide the control one setting to the left to make it less cold.

If you need to adjust temperatures in the refrigerator or freezer, use the settings listed in the chart below as a guide. Wait at least 24 hours between adjustments.

CONDITION/REASON:

ADJUSTMENT:

 

 

REFRIGERATOR too warm

REFRIGERATOR Control

 

one setting higher

 

 

FREEZER too warm/

FREEZER Control

too little ice

one setting higher

 

 

REFRIGERATOR too cold

REFRIGERATOR Control

 

one setting lower

 

 

FREEZER too cold

FREEZER Control

 

one setting lower

Crisper Humidity Control

(on some models)

You can control the amount of humidity in the moisture-sealed crisper. Adjust the control to any setting between LOW and HIGH.

LOW (open) for best storage of fruits and vegetables with skins.

HIGH (closed) for best storage of fresh, leafy vegetables.

Chilled Door Bin

(on some models)

Cool air from the freezer is directed to the refrigerator door bin directly beneath the vents.

NOTE: The dairy compartment and can rack are not associated with the Chilled Door Bin feature.

Chilled Door Bin Control

The chilled door bin control is located on the left-hand side of the refrigerator compartment.

A

A. Chilled door bin control

Slide the door chill control to the left to reduce the flow of cold air to the bin and make it less cold.

Slide the door chill control to the right to increase the flow of cold air to the bin and make it colder.

Convertible Drawer Temperature Control

(on some models)

The control can be adjusted to properly chill meats or vegetables. The air inside the pan is cooled to avoid “spot” freezing and can be set to keep meats at the National Livestock and Meat Board recommended storage temperatures of 28° to 32°F (-2° to 0°C). The convertible vegetable/meat drawer control comes preset at the lowest meat setting.

To store meat:

Set the control to one of the three MEAT settings to store meat at its optimal storage temperature.

To store vegetables:

Set the control to VEG to store vegetables at their optimal storage temperatures.

NOTE: If food starts to freeze, move the control to the left (less cold). Remember to wait 24 hours between adjustments.

Water and Ice Dispensers

(on some models)

Depending on your model, you may have one or more of the following options: the ability to select either crushed or cubed ice, a special light that turns on when you use the dispenser, or a lock option to avoid unintentional dispensing.

NOTES:

The dispensing system will not operate when the freezer door is open.

After connecting the refrigerator to a water source, flush the water system. Use a sturdy container to depress and hold the water dispenser lever for 5 seconds, then release it for

5 seconds. Repeat until water begins to flow. Once water begins to flow, continue depressing and releasing the dispenser lever (5 seconds on, 5 seconds off) for an additional 5 minutes. This will flush air from the filter and water dispensing system. Additional flushing may be required in some households. As air is cleared from the system, water may spurt out of the dispenser.

Allow 24 hours for the refrigerator to cool down and chill water.

Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.

6

Page 6
Image 6
Maytag W10214491A, W10214490A Crisper Humidity Control, Chilled Door Bin, Water and Ice Dispensers, Adjusting Controls

W10214490A, W10214491A specifications

The Maytag W10214491A and W10214490A are pivotal components designed to enhance the functionality and efficiency of various Maytag appliances. These parts, which primarily serve as replacement components for dishwashers, are engineered for durability, performance, and ease of installation, making them essential for maintaining the optimal operation of your home appliance.

The W10214491A is a high-quality dishwasher door latch. This essential part ensures the dishwasher door securely closes, preventing leaks and ensuring safe operation during cycles. Its robust construction stands up to the rigors of daily use, while the exact fit and design help maintain the dishwasher's overall performance. The door latch is crafted from premium materials resistant to wear and tear, providing long-lasting reliability.

On the other hand, the W10214490A is a compatible replacement part for the door latch assembly. It integrates seamlessly with various Maytag dishwasher models, ensuring a secure and proper fit that facilitates optimal door function. This unit is designed with user-friendly installation in mind, often requiring just a few tools and minimal technical skills. By using this part, homeowners can avoid the costs associated with professional repairs while enjoying the satisfaction of performing their repair work.

Both models reinforce Maytag's commitment to superior engineering. These products embody the brand's focus on quality, ensuring that every appliance part is built to last. An important characteristic of these parts is their compatibility with a range of Maytag dishwashers, allowing for versatility in repair options. This adaptability is crucial for appliance owners looking to maintain reliability without investing in a new unit.

In addition to their functional benefits, these parts reflect Maytag's dedication to energy efficiency and sustainable practices. By prolonging the life of existing appliances through high-quality replacements, you contribute to reducing waste and energy consumption, promoting an eco-friendly approach to home maintenance.

In conclusion, the Maytag W10214491A and W10214490A represent quality and reliability in appliance repair. With features designed for durability, easy installation, and compatibility with various models, these components are vital for homeowners seeking to maintain their dishwashers efficiently. Investing in these parts not only ensures appliances run smoothly but also promotes a sustainable approach to appliance ownership.