An (blinking) | Currently answering a call. |
F (blinking) | Memory is full. |
Six bars (blinking) | Recording a memo or announcement. |
LA (Line Access) | External line remote answering system. |
TROUBLESHOOTING GUIDE
CORDLESS PHONE SOLUTIONS
No dial tone
•Check or repeat installation steps:
Make sure the base power cord is connected to a working electrical outlet.
Make sure the telephone line cord is connected to the base and the wall jack.
•Connect another phone to the same wall jack; if it doesn’t work, the problem might be your wiring or local service.
•The handset may be out of range of the base. Move closer to the base.
•Make sure the battery is properly charged (16 hours).
•Make sure the battery pack (in the handset) is properly installed.
•The handset should beep when you press the TALK/callback button, and the charge/in use indicator on the base should be lit when the handset rests in the cradle. If not, the battery many need to be charged
•Place the handset in the base for at least 20 seconds to reset the unit. Dial tone is OK, but can’t dial out
•Make sure the TONE/PULSE setting is programmed to the type of service you are subscribed to.
Handset does not ring
•Make sure the RINGER switch on the handset is turned to ON.
•The handset may be out of range of the base. Move closer to the base.
•You may have too many extension phones on your line. Try unplugging some phones.
•Check for dial tone.
31
