GE 25893 manual To erase a message from the handset, Telephone SET UP

3.To erase a message from the handset:

•Press answerer/delete button to enter into the handset remote access operation.

•Press play/stop on the handset (the 2 button). The message plays.

•Press erase (the 0 button) to erase the message during message playback.

NOTE: Erased messages cannot be restored.

LEAVING A MEMO

Use the memo feature to leave a message.

1.Press and hold the memo button. You need to hold the button until you finish the message.

2.Begin speaking after you hear the beep.

3.Release the memo button when you finish.

TELEPHONE SET UP

PROGRAMMABLE MENUS

There are four programmable menus available: Language, Local Area Code, Tone/Pulse and Factory Default. When you program these settings, make sure the phone is OFF ( not in talk mode).

DISPLAY LANGUAGE

1.Press the program button until 1 ENGLISH 2 FRA 3 ESP shows in the display.

2.Use the CID/VOL left (-) or right (+) arrow button or the handset touch- tone pad to enter your selection.

3.Press program to confirm.

NOTE: Press the EXIT button once to keep the previous setting and return to the standby screen.

LOCAL AREA CODE

1.Press the program button until SET AREA CODE shows in the display. The default is - - -.

2.Use the handset touch-tone pad to enter the area code.

15