WALL MOUNTING

NOTE: For best results, charge the telephone/answering system on a flat surface before hanging it on the wall.

1.Turn the base over.

2.Attach the wall mounting pedestal by first inserting the tabs on the open edge of the pedestal into the slots on the lower portion of the bottom of the base. Then push down and snap the pedestal into place.

3.Slip the mounting holes (on the back of the base and pedestal) over the wall plate posts and slide the unit down into place. (Wall plate not included.)

ANSWERING SYSTEM SETUP

This section shows you how to set up your answering system to receive incoming calls. Before you begin the set up process, you must turn on the answering system.

Press the answerer on/off button to turn the answering system on and off. The MESSAGES indicator lights when the answering system is on. The indicator blinks when you have messages.

NOTE: The answering system displays “- -” when it is off.

VOICE TIME/DAY STAMP

1.Make sure the answering system is ON.

2.Press and hold the day/check button to set the day of the week.

11

Page 11
Image 11
GE 25893 manual Answering System Setup