Warming Center Element

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before or after cooking.

Doing so can result in food poisoning or sickness.

Use the Warming Center element to keep cooked foods warm. One hour is the recommended maximum time to maintain food quality.

Do not use it to heat cold foods.

The Warming Center element can be used alone or when any of the other surface cooking areas are being used.

The Warming Center element area will not glow red when cycling on. However, its indicator light will glow as long as the Warming Center element area is too hot to touch.

Bridge Element

Use the bridge area to create an oblong heated area to cook with large cookware.

 

C

C

C

 

B

B

 

A

A

A

A

A. Left front single element

B. Left center bridge element

C. Left rear single element

Left front control

Left rear control

To use SINGLE (A):

1.Push in and turn left front control knob clockwise from the (Off) position to the SINGLE zone anywhere between LOW and HIGH.

2.Turn control knob to Off when finished.

To use SINGLE (C):

1.Push in and turn left rear control knob counterclockwise from the (Off) position to anywhere between LOW and HIGH.

2.Turn control knob to Off when finished.

To use SINGLE and BRIDGE area (A+B):

1.Push in and turn left front control knob counterclockwise from the (Off) position to the BRIDGE zone anywhere between LOW and HIGH.

2.Turn both control knobs to Off when finished.

To use both SINGLE elements and BRIDGE (A+B+C):

1.Push in and turn left front control knob counterclockwise from the (Off) position to the BRIDGE zone anywhere between LOW and HIGH.

2.Push in and turn left rear control knob counterclockwise from the (Off) position to anywhere between LOW and HIGH.

3.Turn both control knobs to Off when finished.

To use both SINGLE elements (A+C):

1.Push in and turn left front control knob clockwise from the (Off) position to the SINGLE zone anywhere between LOW and HIGH.

2.Push in and turn left rear control knob counterclockwise from the (Off) position to anywhere between LOW and HIGH.

3.Turn control knob to Off when finished.

OVEN USE

Odors and smoke are normal when the oven is used the first few times, or when it is heavily soiled.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off. Exposure to the fumes may result in death to certain birds. Always move birds to another closed and well- ventilated room.

Electronic Oven Controls

Control Display

The display will flash when powered up or after a power loss. Press CANCEL to clear. When oven is not in use, the time of day is displayed. Indicator lights show functions that are in use.

Tones

Tones are audible signals, indicating the following:

One tone

■Valid pad press

■Oven is preheated (long tone)

■Function has been entered

■Reminder (on some models), repeating each minute after the end-of-cycle tones

Three tones

■Invalid pad press

Four tones

■End of cycle

To Change Tone Settings:

Tone Pitch

Sets the pitch of the tone to either high or low.

Press and hold BROIL for 5 seconds. “TONE PITCH HIGH” or “TONE PITCH LOW” will appear in the display. Press and hold BROIL again to change setting.

To exit, press CANCEL.

Key Press Tones

Activates or turns off the tones when a keypad is pressed.

Press and hold KEEP WARM for 5 seconds. “KEY PRESS TONES ON” or “KEY PRESS TONES OFF” will appear in the display. Press and hold KEEP WARM again to change setting.

To exit, press CANCEL.

7

Page 6 Page 8
Page 7
Image 7
Maytag W10239461A warranty Oven USE, Electronic Oven Controls
Page 6 Page 8

W10239461A specifications

The Maytag W10239461A is a high-quality appliance component designed to enhance the functionality and efficiency of Maytag washing machines. This specific part is recognized for its durability and reliability, making it an essential choice for appliance repairs and maintenance.

One of the standout features of the W10239461A is its compatibility with a range of Maytag washer models. This versatility ensures that the part can be used across various machines, simplifying the repair process for homeowners and technicians alike. Its design is tailored to meet the rigorous standards set forth by Maytag, guaranteeing a perfect fit and optimal performance.

In terms of technology, the W10239461A incorporates advanced engineering principles that enable seamless operation within the washing machine. It not only enhances the overall performance of the appliance but also contributes to energy efficiency. This part is manufactured with high-quality materials that resist wear and tear, ensuring a long lifespan and reduced need for frequent replacements.

Another significant characteristic of the W10239461A is its user-friendly installation process. The part is designed for straightforward replacement, enabling even those with minimal technical skills to undertake repairs without the need for professional help. This user-centric approach saves time and money, making it a valuable addition to any DIY enthusiast's toolkit.

Moreover, the W10239461A is engineered to minimize noise and vibration during the wash cycle, resulting in a quieter laundry experience. This feature enhances the convenience of using the washing machine, particularly in homes where laundry is done during late hours or in close quarters.

To sum up, the Maytag W10239461A is a vital component for Maytag washing machines, offering compatibility, durability, and ease of installation. Its advanced technology ensures efficient operation while minimizing disturbances, making it a reliable choice for anyone looking to maintain or repair their washing machine. Investing in the W10239461A means investing in quality and performance, ensuring your washing machine continues to run smoothly for years to come.
Top Page Image Contents