Positioning Racks and Bakeware

IMPORTANT: To avoid permanent damage to the porcelain finish, do not place food or bakeware directly on the oven door or bottom.

Bakeware

To cook food evenly, hot air must be able to circulate. Allow

2" (5 cm) of space around bakeware and oven walls. Make sure that no bakeware piece is directly over another.

Racks

Position racks before turning on the oven.

Do not move racks with bakeware on them.

Make sure racks are level.

To move a rack, pull it out to the stop position, raise the front edge, and then lift out. Use the following illustration and charts as a guide.

7

6

5

4

3

2

1

Rack Positions

Rack 7: Broiling thin, nonfatty foods and for 3-rack convection baking.

Rack 6: Toasting bread, most broiling and 2-rack baking.

Rack 5: Broiling of thicker foods like bone-in chicken and 2-rack baking.

Rack 4: Most baked goods on a cookie sheet, custard pies, layer cakes or a jelly roll pan; frozen convenience foods, 3-rack baking and most single rack baking.

Rack 3: Most baked goods on a cookie sheet, custard pies, layer cakes or a jelly roll pan; frozen convenience foods, 3-rack baking and most single rack baking.

Rack 2: Large roasts, turkey, Bundt cake, and 3-rack baking.

Rack 1: Large roasts, turkey, and 3-rack baking.

Multiple Rack Cooking

2-rack: Use rack positions 4 and 7, or 3 and 6 for regular or convection baking.

3-rack (convection only): Use rack positions 1, 3 and 5; 2, 4 and 6; or 3, 5 and 7.

Baking Layer Cakes on 2 Racks

For best results when baking cakes on 2 racks, use racks 4 and 7 for baking. Place the cakes on the racks as shown.

A

A. Oven vent

Oven Vent

The oven vent releases hot air and moisture from the oven, and should not be blocked or covered. Blocking or covering the oven vent will cause poor air circulation, affecting cooking and cleaning results. Do not set plastics, paper or other items that could melt or burn near the oven vent.

Baking and Roasting

Precision Cooking™ System - Precise Bake

The Precise Bake system electronically regulates the oven heat levels during preheat and bake to maintain a precise temperature range for optimal cooking results. The bake and broil elements cycle on and off in intervals. The bake element will glow red when cycling on; the broil element will not. This feature is automatically activated when the oven is in use.

Before baking and roasting, position racks according to “Positioning Racks and Bakeware” section. When roasting, it is not necessary to wait for the oven preheat cycle to end before putting food in unless it is recommended in the recipe.

Preheating

When START is pressed, the oven will begin preheating. Once 170ºF (75ºC) is reached, the display temperature will increase as the actual temperature of the oven increases. When the preheat temperature is reached, a tone will sound, and the selected temperature will appear on the display.

Broiling

Broiling uses direct radiant heat to cook food. Changing the temperature when Custom Broiling allows more precise control when cooking. The lower the temperature, the slower the cooking. Thicker cuts and unevenly shaped pieces of meat, fish and poultry may cook better at lower broiling temperatures.

For best results, use a broiler pan and grid. It is designed to drain juices and help avoid spatter and smoke.

If you would like to purchase a broiler pan, one may be ordered. Please refer to the cover for contact information. Ask for Part Number 4396923.

It is not necessary to preheat the oven before putting food in unless recommended in the recipe. Position food on grid in a broiler pan, then place it in the center of the oven rack. Close the door to ensure proper broiling temperature.

9

Page 9
Image 9
Maytag W10239464A warranty Positioning Racks and Bakeware, Oven Vent, Baking and Roasting, Broiling