Maytag W10255025A Caster Installation, Prepare The Dishwasher, Put dishwasher on its back

Models: W10255025A

1 12
Download 12 pages 39.56 Kb
Page 4
Image 4
CASTER INSTALLATION

CASTER INSTALLATION

Excessive Weight Hazard

Use two or more people to move and install dishwasher.

Failure to do so can result in back or other injury.

1 Put 2 corner posts on floor behind dishwasher

Corner post

2 Put dishwasher on its back

Dishwasher door frame

Grasp sides of dishwasher door frame and put dishwasher on its back.

3 Attach casters

Excessive Weight Hazard Caster

Firmly push casters into holes at corners of dishwasher as shown. Pull on each caster to check that casters are snug.

Helpful Tip: It may be helpful to place a piece of wood between the caster wheels and then lightly tap the wood with a hammer.

4

PREPARE THE DISHWASHER

Tip Over Hazard

Do not use dishwasher until completely installed. Do not push down on open door.

Doing so can result in serious injury or cuts.

Excessive Weight Hazard

Use two or more people to move and install dishwasher.

Failure to do so can result in back or other injury.

1 Stand dishwasher upright

Beaded foam shipping pieces

Stand dishwasher upright. Open door and remove shipping foam, cardboard tower and any other shipping materials. Close dishwasher door. Latch dishwasher door shut.

Page 4
Image 4
Maytag W10255025A Caster Installation, Prepare The Dishwasher, Put 2 corner posts on floor behind dishwasher