4.When the connector snaps into place, release the locking collar.
5.Turn the hot water on slowly until it is all the way on.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
6. Plug into a grounded 3 prong outlet.
Using the Faucet
You can draw water from the faucet while the dishwasher is connected.
NOTE: Do not draw water while the dishwasher is filling or while water is being pumped out. (This helps avoid a low fill when dishwasher is filling or keeping drain water from mixing with fresh water when dishwasher is draining.)
Press the red button on the hose connector to draw water from the faucet. (The faucet is set on hot. Adjust the faucet for the water temperature you want.)
NOTE: Turn the hot water back on after you draw water from the faucet. Turn off the cold water.
Adjust water temperature
6
Disconnecting the Dishwasher
1.Turn off the hot water. (This can be done after the last rinse.)
2.Press the red button on the connector to release the water pressure.
Disconnect hose from faucet
Faucet adapter
Locking collar
Red button
Hose connector
3.Lift slightly on the hose connector while pulling down the locking collar. Pull down on the connector.
4.Empty any remaining water from the connector by turning the connector upside down.
5.Unplug the power supply cord and return it to the storage compartment.
6.Return the hoses to the storage compartment.
STORING
Storing for the Summer
Turn off the water supply and power supply to the dishwasher during the summer to avoid damage to your dishwasher.
Winterizing your Dishwasher
Avoid water damage to your dishwasher and home due to freezing water lines. If your dishwasher is left in a seasonal dwelling or could be exposed to near freezing temperatures, have your dishwasher winterized by authorized service personnel.
