TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

In the U.S.A., www.maytag.com In Canada, www.maytag.ca

Refrigerator Operation

The refrigerator will not operate

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

■Power cord unplugged? Plug into a grounded 3 prong outlet.

■Is outlet working? Plug in a lamp to see if the outlet is working.

■Household fuse blown or circuit breaker tripped? Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

■Are controls on? Make sure the refrigerator controls are on. See “Using the Controls.”

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

NOTE: Adjusting the temperature controls to coldest setting will not cool either compartment more quickly.

■Rattling - flow of refrigerant, water line, or from items placed on top of the refrigerator

■Sizzling/Gurgling - water dripping on the heater during defrost cycle

■Popping - contraction/expansion of inside walls, especially during initial cool-down

■Water running - may be heard when ice melts during the defrost cycle and water runs into the drain pan

■Creaking/Cracking - occurs as ice is being ejected from the ice maker mold.

The doors will not close completely

■Door blocked open? Move food packages away from door.

■Bin or shelf in the way? Push bin or shelf back in the correct position.

The doors are difficult to open

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

■Are the gaskets dirty or sticky? Clean gaskets with mild soap and warm water.

The motor seems to run too much

Your new refrigerator may run longer than your old one due to its high-efficiency compressor and fans. The refrigerator may run even longer if the room is warm, a large food load is added, doors are opened often, or if the doors have been left open.

The refrigerator is noisy

Refrigerator noise has been reduced over the years. Due to this reduction, you may hear intermittent noises from your new refrigerator that you did not notice from your old model. Below are listed some normal sounds with an explanation.

■Buzzing - heard when the water valve opens to fill the ice maker

■Pulsating - fans/compressor adjusting to optimize performance

The refrigerator rocks and is not stable

■What do I do if the refrigerator rocks and is not stable? To stabilize the refrigerator, remove the base grille and lower the leveling feet until they touch the floor. See the “Door Removal” instructions, either in the User Instructions or the separate instruction sheet provided with your refrigerator.

10

Page 9 Page 11
Page 10
Image 10
Maytag W10289681A, W10289680A installation instructions Troubleshooting, Refrigerator Operation
Page 9 Page 11

W10289680A, W10289681A specifications

Maytag, renowned for its durable and high-performance appliances, continues to innovate with the release of its key components, the W10289681A and W10289680A. These parts are designed specifically for Maytag washers and dryers, enhancing functionality and efficiency.

The W10289681A is a water inlet valve that plays a crucial role in controlling the flow of water into your washing machine. By utilizing advanced technology, it ensures accurate water levels for optimal washing performance. This part is designed with a high-strength construction to withstand wear and tear, ensuring longevity and reliability. The valve also features a dual inlet design, allowing both hot and cold water to flow into the machine, facilitating versatile washing cycles tailored to different fabric types and soiling levels.

The W10289680A, on the other hand, is a crucial part of the dryer system, specifically the thermal fuse. It serves as a safety feature that prevents the dryer from overheating, thereby protecting both the appliance and your home. When the internal temperature exceeds a predetermined limit, the thermal fuse disconnects the power, effectively shutting down the machine and preventing potential hazards. This safety mechanism is integral in prolonging the life of the dryer and ensuring safe operation.

Both components exemplify Maytag's commitment to quality and customer satisfaction. They are easy to install, making them user-friendly options for DIY repairs. Furthermore, these parts adhere to stringent industry standards, ensuring compatibility with a variety of Maytag washer and dryer models.

In addition to their individual functions, these components work in harmony to enhance the overall performance of the laundry system. The effective water control and safety features provided by the W10289681A and W10289680A ensure that laundry can be done efficiently and safely, reflecting the modern demands of household chores.

Overall, investing in Maytag parts like the W10289681A and W10289680A not only ensures the functionality of your appliances but also promotes a hassle-free laundry experience. With a focus on innovation, safety, and durability, Maytag solidifies its reputation as a leading brand in home appliances.
Top Page Image Contents