INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
Parts Supplied
Check that all parts are included.
Tools Needed
■ | Pliers | ■ | 10" adjustable wrench |
■ | Phillips screwdriver | ■ | Utility knife |
■ | ■ | Level | |
■ ³⁄₁₆" and ¼" nut drivers or | ■ | Cordless drill | |
A 
BC D
| hex sockets | ■ | ¹⁄₈" drill bit |
| Measuring tape or ruler | ||
■ | ■ | Security | |
■ | 1½" hole saw bit |
| driver (on some models) |
Parts Needed
B
A 
C
A. 72" (182.9 cm) flexible water supply line
B. Zip tie
C. Appropriate sized UL Listed wire connectors (2)
EF 
IG
J H 
K 
L
M 
N
A. ³⁄₄" UL Listed/CSA Approved strain relief
B. 1.25" hose clamp
C. Mounting bracket screws (8) D. Unit mounting screws (4)
E. Drain hose connector F. Mounting brackets (4)
G. Drain connector spring clamps (2)
H. Trim strips (2)
I. Toe kick brackets (2)
J. Toe kick bracket screws (2) K. Toe kick trim
L. Panel fasteners (on some models) (2)
M. TORX®† screws (on some models) (10)
N. Drain hose
†®TORX is a registered trademark of Acument Intellectual Properties, LLC
4
