Maytag W10312956A - SP, W10312952A manual Cycle Guide Timed Cycles, Cycle Guide Steam Cycles

CYCLE GUIDE — TIMED CYCLES

Settings and options shown in bold are default settings for that cycle. Not all settings and options are available on each cycle.

Adjusting drying time on Timed Cycles

When you select a Timed Cycle, the default time appears in the display. Use the LCD controls to increase or decrease the time in 1 minute increments. Press and hold to change the time in 5 minute increments.

The maximum dry time is 100 minutes.

Selecting the Drying Temperature

A High heat setting may be used for drying heavyweight items such as towels and work clothes.

A Low to Medium heat setting may be used for drying medium-weight items such as sheets, blouses, dresses, underwear, permanent press fabrics, and some knits.

Use a no heat (air dry) setting for foam, rubber, plastic, or heat-sensitive fabrics.

Line dry bonded or laminated fabrics.

NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions.

	Cycle:	Drying	Default	Available
Items to dry:		Temperature:	Time:	Options:	Cycle Details:
Small loads and	Small Load	High	18	Wrinkle Prevent†	For small loads of 3-4 items.
sportswear		Medium-High
		Medium
		Low
		Extra Low
		Air Only
Any load	Timed Dry	High	40	Wrinkle Prevent†	Use to dry items to a damp level for items that do
NOTE: Select Air		Medium-High			not require an entire drying cycle, or to finish drying
Only to dry foam,		Medium			slightly damp items. Select a drying temperature
rubber, plastic, or		Low			based on the type of fabrics in your load. If you are
heat-sensitive		Extra Low			unsure of the temperature to select for a load,
fabrics.		Air Only			select the lower setting rather than the higher setting.

†Wrinkle Prevent™ with Steam option is available only with High, Medium-High, and Medium Drying Temperature settings.

CYCLE GUIDE — STEAM CYCLES

Settings and options shown in bold are default settings for that cycle. Not all settings and options are available on each cycle.

Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.

Items to	Cycle:	Drying	Default	Available
refresh:		Temperature:	Time:	Options:	Cycle Details:
Mixed loads	Custom	Medium-High	15	Wrinkle Prevent†	Use to reduce wrinkles from dry items, including
	Refresh			Reduce Static	loads left in the dryer too long. For larger loads,
	(on some				you may add additional time up to 50 minutes in
	models)				5 minute increments using the Timed Dry adjust
					buttons. Do not add dryer sheets.
Shirts, blouses,	Auto	High	22	Wrinkle Prevent†	Use to reduce odors and light wrinkles from small
and slacks	Refresh	Medium-High		Reduce Static	to medium-sized loads of dry items. Dry time will
		Medium			automatically adjust when the load size is sensed.
					Cycle run time cannot be manually adjusted.
					Temperature is selectable. Do not add dryer sheets.

†Wrinkle Prevent™ with Steam option is available only with High, Medium-High, and Medium Drying Temperature settings.

9