AMPLIFIER APPLICATIONS
PAB 1200.1 D Mono Amplifier
Basic application
Interconnect cable checklist:
-Connect the line inputs to a Radio/CD RCA outputs or line output of the full range primary amplifier with good quality RCA cables. A “Y” adapter may be needed as shown in the diagram.
-Use at least 16 gauge speaker wiring. These amplifiers have dual speaker terminals, simplifying the hookup of multiple speakers
Crossover frequency control checklist:
-LOW PASS: 35Hz to 250Hz
-SUBSONIC: 10 Hz to 50 Hz
-BASS EQ: 0 to 9 dB
-PHASE: 0 to 180 degrees
Level control checklist:
Refer to the section “Setting up systems after installation for best
performance”
Minimum final loudspeaker impedance: 1 ohm
English
*Note: You can use the Radio/CD designated mono line output or a full range stereo line output. For full range stereo line output, you will need an optional
13
