MB QUART SCR Tractor Contd, Cutter Deck, Grass Catching System, Hydraulic System, Productivity

Section 3

3.3 TRACTOR (CONT'D)

Travel Speed:
Forward	0 - 8.5 MPH
Reverse	0 - 5.0 MPH

3.4 CUTTER DECK

-NOTE-

The machine will travel at 8.5 mph for transport purposes. For best cutting performance the forward travel speed should be adjusted depending upon the cutting conditions.

No. of Blades	3
Width of Cut	42", 48" & 52"
Cutter Blades	Three (3) 16-1/2" (P/N 481997) Marbane Blades
Deck Drive	Belt Driven Manual Clutch Connected to a Drive Shaft to a
	Gearbox on the Cutter Deck
Manual Clutch Type	Manual blade engagement system with engagement lever and
	double v-belt drive
Cutting Height Adjustment	Four Corner Pin Adjustment, 1.5" to 5" in 1/2" increments
Deck Tilt	Manually by Lifting Deck and Engaging Lock Pin
Drive Shaft	Shaft With Two High Speed U-Joints
3.5 GRASS CATCHING SYSTEM
Type	Out-Front Rear Deck Discharge into Blower which discharges
	the Grass Clippings into a Hopper
Hopper	90-Gallon Molded Plastic with Osillating Discharge Chute
Discharge Blower	12" Diameter
Side Discharge	Extra Wide Discharge Opening on the Left Hand Side with Spring
	Loaded Discharge Chute
3.6 HYDRAULIC SYSTEM
Hydraulic Oil Filter	10 Micron Spin-on Element Type
Hydraulic Reservoir	Nylon; 6 Quart Capacity
3.7 WEIGHTS AND DIMENSIONS
	SCR42-25CH SCR48-25CH SCR48-27KA
Length	95.0"	95.0"	95.0"
Overall Width	42.0"	48.0"	48.0"
Overall Height	44.0"	44.0"	44.0"
Operating Weight	1285 lbs.	1260lbs.	1300lbs.
	SCR52-25CH SCR52-27KA
Length	95.0"	95.0"
Overall Width	52.0"	52.0"
Overall Height	44.0"	44.0."
Operating Weight	1300lbs.	1350lbs.

3.8 PRODUCTIVITY

The following chart will aid you in determining how many acres your Scag mower will cut per day.

The chart is an estimate based on 8 hours per day cutting time at 4 MPH with an allowance for overlap and turns.

Cutting Width:	42"	48"	52"
Acres Per Day:	20	21	23

9