Air filter | REPLACE SPARK PLUG | |
Knob | Replace the spark plug each year to ensure | |
the engine starts easier and runs better. Set | ||
| spark plug gap at 0,6 mm. Ignition timing is | |
| fixed and nonadjustable. | |
| 1. | Twist, then pull off spark plug boot. |
| 2. | Remove spark plug from cylinder and dis- |
Air filter cover | 3. | card. |
| Replace with Champion | |
|
| plug and tighten securely with a 19 mm |
|
| socket wrench. |
| 4. | Reinstall the spark plug boot. |
SERVICE AND ADJUSTMENTS
REPLACING THE LINE
1.Press the tabs on the side of the trimmer head and remove cover and spool.
TabTab
Cover
Spool
2.Remove any remaining line.
3.Clean dirt and debris from all parts. Re- place spool if it is worn or damaged.
4.Replace with a
WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.
5.When installing new line on an existing spool, hold the spool as shown.
6.Bend the line at the midpoint and insert the bend into the slot in the center rim of the spool. Ensure line snaps into position in the slot.
Slot
7.With your finger between the lines, wrap the lines evenly and firmly around the spool in a clockwise direction.
16