McCulloch 96071002300, H338HL, 960 71 00-23 Container Mounting See Fig, Lower Chute See a

4 CONTAINER MOUNTING (See Fig. 4)

1.Install one container to left side first with warning to outside of unit. Install another container to center po- sition and one in right position.

NOTE: Right container should always overlap left container at center supports.

2.Close cover and lock latch handles over center support tubes.

CONTAINER WARNING

COVER LATCH HANDLES

CENTER

SUPPORT

TUBES

		WAR	NING
03022
	WAR	NING
CONTAINER			CONTAINER
HANDLE			WARNING

FIG. 4

5 LOWER CHUTE (See Fig. 5A)

1.Raise and hold deflector shield in upright position.

2.Place slot in lower chute over tab on mower and position lower chute over mower opening as shown.

3.Hook rear latch into flange hole on back of mower.

4.Hook front latch into tab hole on front of mower.

•If your tractor is equipped with gauge wheels on the deck, then it will be necessary to hook the rear latch into the hole in the R.H. gauge wheel bracket.

CAUTION: Do not remove deflector shield from mower. Raise and hold shield when attaching lower chute and allow it to rest on chute while in operation.

REAR GAUGE

WHEEL

BRACKET

DEFLECTOR SHIELD

HINGE BRACKET

EXTENDED EDGE "B"

Must be under deflector shieldTAB and along side the hinge bracket

DEFLECTOR

SHIELD

03058

FRONT

LATCH

WITH REAR		FIG. 5A
GAUGE WHEELS
REAR LATCH	WITHOUT	REAR LATCH
	GAUGE WHEELS
	FIG. 5A

7