SAFETY RULES

Safe Operation Practices for Ride-On Mowers

IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

WARNING: In order to prevent ac- cidental starting when setting up, transporting, adjusting or making re- pairs, always disconnect spark plug wire and place wire where it cannot contact spark plug.

WARNING: Do not coast down a hill in neutral, you may lose control of the tractor.

WARNING: Tow only the attachments that are recommended by and com- ply with specifications of the manu- facturer of your tractor. Use common sense when towing. Operate only at the lowest possible speed when on a slope. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

I. GENERAL OPERATION

Read, understand, and follow all instructions on the machine and in the manual before starting.

Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at all times.

Only allow responsible adults, who are familiar with the instructions, to operate the machine.

Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blades.

Be sure the area is clear of bystanders before operat- ing. Stop machine if anyone enters the area.

Never carry passengers.

Do not mow in reverse unless absolutely necessary. Al- ways look down and behind before and while backing.

Never direct discharged material toward anyone. Avoid discharging material against a wall or obstruction. Material may ricochet back toward the operator. Stop the blades when crossing gravel surfaces.

Do not operate machine without the entire grass catcher, discharge guard, or other safety devices in place and working.

Slow down before turning.

Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting.

Disengage blades when not mowing. Shut off engine and wait for all parts to come to a complete stop before cleaning the machine, removing the grass catcher, or unclogging the discharge guard.

Operate machine only in daylight or good artificial light.

Do not operate the machine while under the influence of alcohol or drugs.

Watch for traffic when operating near or crossing roadways.

Use extra care when loading or unloading the machine into a trailer or truck.

Always wear eye protection when operating machine.

2

Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-re- lated injuries. These operators should evaluate their ability to operate the riding mower safely enough to protect themselves and others from serious injury.

Follow the manufacturer's recommendation for wheel weights or counterweights.

Keep machine free of grass , leaves or other debris build-up which can touch hot exhaust/engine parts and burn. Do not allow the mower deck to plow leaves or other debris which can cause build-up to occur. Clean any oil or fuel spillage before operating or storing the machine. Allow machine to cool before storage.

II. SLOPE OPERATION

Slopes are a major factor related to loss of control and tip-over accidents, which can result in severe injury or death. Operation on all slopes requires extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.

Mow up and down slopes, not across.

Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

Choose a low ground speed so that you will not have to stop or shift while on the slope.

Do not mow on wet grass. Tires may lose traction. Always keep the machine in gear when going down slopes. Do not shift to neutral and coast downhill.

Avoid starting, stopping, or turning on a slope. If the tires lose traction, disengage the blades and proceed slowly straight down the slope.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction, which could cause the machine to roll over.

Use extra care while operating machine with grass catchers or other attachments; they can affect the stability of the machine. Do no use on steep slopes.

Do not try to stabilize the machine by putting your foot on the ground.

Do not mow near drop-offs, ditches, or embankments. The machine could suddenly roll over if a wheel is over the edge or if the edge caves in.

III. CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

• Keep children out of the mowing area and in the watchful care of a responsible adult other than the operator.

• Be alert and turn machine off if a child enters the area.

• Before and while backing, look behind and down for small children.

• Never carry children, even with the blades shut off. They may fall off and be seriously injured or interfere with safe machine operation. Children who have been given rides in the past may suddenly appear in the mowing area for another ride and be run over or backed over by the machine.

• Never allow children to operate the machine.

• Use extra care when approaching blind corners, shrubs, trees, or other objects that may block your view of a child.

Page 2
Image 2
McCulloch 960 71 00-23 Safe Operation Practices for Ride-On Mowers, General Operation, II. Slope Operation, III. Children

960 71 00-23, 96071002300, H338HL specifications

The McCulloch H338HL is a powerful and reliable chainsaw designed for both professional and casual users who demand high-performance equipment. This machine uniquely combines efficiency and comfort, making it a go-to tool for various tasks, from cutting firewood to maintaining your garden.

One of the standout features of the McCulloch H338HL is its powerful engine. Equipped with a robust two-cycle engine, this chainsaw delivers impressive power while maintaining relatively low fuel consumption. This means users can enjoy longer working periods without the need for frequent refueling, which is a significant advantage for those engaged in extended cutting tasks.

The chainsaw also showcases a user-friendly design, incorporating an ergonomic handle that ensures a comfortable grip during operation. This feature significantly reduces fatigue, allowing users to work longer without discomfort. Additionally, the lightweight construction of the H338HL makes it easy to maneuver, providing added convenience for both new and experienced operators.

Another notable technology included in the McCulloch H338HL is its automatic chain lubrication system. This system ensures that the chain remains adequately lubricated during use, reducing wear and tear while promoting smooth operation. By minimizing the friction between the chain and the guide bar, this technology not only extends the lifespan of the saw but also enhances cutting efficiency.

Safety is paramount when operating any power tool, and the McCulloch H338HL does not fall short in this area. It features a chain brake that quickly stops the chain in the event of kickback, significantly reducing the risk of injury. Additionally, the chainsaw is equipped with a low-vibration system that minimizes vibrations during operation. This allows for a steadier cut and increased control, providing peace of mind to users.

Convenience is further emphasized with the H338HL's easy-start mechanism, which simplifies the ignition process and allows for quick readiness to work. The combination of these features makes the McCulloch H338HL a reliable, efficient, and user-friendly chainsaw suitable for a variety of applications.

In summary, the McCulloch H338HL, noted by its part numbers 96071002300 and 960 71 00-23, stands out in the market due to its powerful engine, ergonomic design, automatic chain lubrication, safety features, and overall reliability. Whether for professional or personal use, this chainsaw delivers performance that meets the demands of any cutting task.