McCulloch MC1226 Assembling Your Handheld Steam Cleaner, Connecting Jet Nozzle / Wide Nozzle

Assembling Your

Handheld Steam Cleaner

CONNECTING JET NOZZLE / WIDE NOZZLE

WARNING: DO NOT attempt to connect any accessories while unit is emitting steam. Doing so could result in burns or other injury.

1.Insert cylinder on back of Jet Nozzle or Wide Nozzle (FIGURE 1-A) into opening of Steam Aperture (FIGURE 1-B). Align it so that two tabs on sides of cylinder fit into two guide grooves on sides of opening, as indicated in FIGURE 1. Be sure to push accessory in as far as possible.

TABS GUIDE GROOVES

FIGURE 1 1-A 1-B

2.Rotate Jet Nozzle or Wide Nozzle in a clockwise direction as indicated (FIGURE 2-A). Twist until you feel it “lock” into place and it will move no further. Note that single guide line above Steam Aperture aligns between dual guide lines on Jet Nozzle / Wide Nozzle (FIGURE 2-B).

2-A 2-B

FIGURE 2

3.Note the color difference between the Jet Nozzle or Wide Nozzle (gray) and the Steam Aperture (yellow). When removing the Jet Nozzle or Wide Nozzle, be sure you are only trying to rotate and remove the gray accessory. The Steam Aperture will not rotate and cannot be removed.

6 ENGLISH