McCulloch MC1226 warranty Connecting Utility Brushes

CONNECTING UTILITY BRUSHES

NOTE: Both Nylon Utility Brushes and the Brass Utility Brush are all attached in the same manner.

1.Begin by aligning hexagonal-shaped hole on back of Utility Brush (FIGURE 3-A) with hexagonal tip of Jet Nozzle (FIGURE 3-B).

2.Firmly press Utility Brush onto tip of Jet Nozzle (FIGURE 3-C).

CAUTION: Make sure Utility Brush is pushed as far as possible onto tip to ensure that it is seated securely. This will prevent steam leaks and ensure that Utility Brush is not forced off of Jet Nozzle by steam pressure.

3.To remove Utility Brush, simply grasp and firmly pull until it disconnects from Jet Nozzle.

CAUTION: Make sure unit is unplugged and has had sufficient time to cool down before attempting to remove any accessories.

3-A

3-B

3-C

FIGURE 3

ENGLISH 7