|
|
| Packing Instructions |
|
|
|
|
Packing Instructions |
|
|
|
| Quantity | Part Number | Description |
In the event it is necessary to repack the equipment for | |||
shipment, the equipment must be packed exactly as shown | 1 | 034052 | Shipping carton top |
below. It is very important that the four plastic feet are at- | 1 | 034051 | Shipping carton bottom |
tached to the bottom of the equipment. Four 1/4 - | 2 | 034054 | Foam Pad (top and bottom) |
inch screws and washers must be used to fasten the unit | 2 | 034186 | Foam Pad (front and rear) |
securely to the bottom pad and wood skid. This will ensure | 2 | 034187 | Foam Pad (sides) |
the proper equipment location on the bottom pad. Failure | 1 | 034136 | Inner carton top |
to do this will result in shipping damage. | |||
Use the original shipping carton and interior parts only | 1 | 034137 | Inner carton bottom |
if they are all in good serviceable condition. If a shipping | 1 | 034188 | Foam Pad (inner carton) |
carton or any of the interior part(s) are needed, please | 1 | 034264 | Shipping skid |
call or write Customer Service Department of McIntosh | 4 | 401212 | 1/4 - |
Laboratory. Refer to page 3. Please see the Part List for the | 4 | 104058 | Flat washer |
correct part numbers. |
|
|
|
19
