McIntosh MCC602TM manual Specifications Specifications

Specifications

Specifications

Power Output Stereo

Minimum sine wave continuous average power output per channel, all channels operating is:

300 watts into 2 ohm load

300 watts into 4 ohm load

300 watts into 8 ohm load

Power Output Mono

Minimum sine wave continuous average power output per channel, all channels operating is:

600 watts into 1 ohm load

600 watts into 2 ohm load

600 watts into 4 ohm load

Rated Power Band

20Hz to 20,000Hz

Total Harmonic Distortion

Maximum Total Harmonic Distortion at any power level from 250 milliwatts to rated power output is: 0.005% for 2, 4 or 8 ohm loads (Stereo)

0.005% for 1, 2 or 4 ohm loads (Mono)

Dymanic Headroom 1dB

Frequency Response

+0, -0.25dB from 20Hz to 20,000Hz +0, -3dB from 10Hz to 50,000Hz

Sensitivity

1Volt balanced or unbalanced inputs

A-Weighted Signal To Noise Ratio 114dB (2V)

Intermodulation Distortion

Maximum Intermodulation Distortion if instanta- neous peak output per channel does not exceed twice the rated output, for any combination of fre- quencies from 20Hz to 20,000Hz, with all channels operating is:

0.005% for 2, 4 or 8 ohm loads (Stereo)

0.005% for 1, 2 or 4 ohm loads (Mono)

Input Impedance

15,000 ohms balanced or unbalanced inputs

Power Requirements

12 Volts DC, 3.5 amps (idle) - 100 amps (600 watts)

Dimensions

26-7/8 inches (68.3cm) wide, 12-1/2 inches (31.75 cm) depth, 4-3/16 inches (10.64 cm) high

Weight

50.5pounds (22.9 Kg) net, 58.5 pounds (26.5 Kg) in shipping carton

18