McIntosh How to Operate the MCD201, How to Play a CD Disc, How to Pause a Disc, Track Back

Figure 12

How to Operate the MCD201

ing the DSP/TIME Push-button on the Remote Control. Refer to figure 12.

How to Play a CD Disc

With a disc already loaded into the MCD201, press the PLAY Push-button on the Front Panel of the MCD201 or Remote Control. Refer to figures 5, 6, 10 and 12.

Figure 10

How to Pause a Disc

This feature allows for the temporary stopping of disc playback. Refer to figures 6 and 11.

1.When playing a Disc, press the PAUSE Push-button to temporarily stop playback.

Figure 11

2.Press the PLAY Push-button or press the PAUSE Push-button a second time to cancel Pause and resume playing the disc.

Track Back

Return to the beginning of the Track currently playing by rotating the MCD201 Front Panel TRACK BACK  Control counterclockwise and then releasing the control or momentarily pressing the BACK  Push-button on the Remote Control. Rotate and hold the TRACK BACK

Control or press and hold the BACK  Push-button for rapid selection of the desired previous Tracks. Refer to figures 6 and 12.

Track Next

Advance to the next Track by rotating the MCD201 Front Panel TRACK NEXT  Control clockwise and then re- leasing the control or momentarily pressing the NEXT  Push-button on the Remote Control. Rotate and hold the TRACK NEXT  Control or press and hold the NEXT

Push-button for rapid selection of the next desired Track. Refer to figures 6 and 12.

Fast Forward or Reverse

Press and release the FF (Fast Forward)  or REV (Re- verse)  Push-button to search back and forth rapidly

through a Track on a disc at 4 times the normal speed. To return to normal playback, press and release the same FF (Fast Forward)  or REV (Reverse)  Push-button, press the PLAY or press the PAUSE Push-button. Refer to figures 6 and 12.

Note: The Fast Forward and Reverse Modes work within the track playing.

Stop Mode

Press the STOP Push-button at any time to stop Playback. To listen to the disc again, press the PLAY Push-button and playback will start from the beginning of the disc.

Volume Level The MCD201 has both Fixed and Variable Output Level Connections. The Variable Output Level Connec- tions (Rear Panel and Front Panel Headphone Jack) are controlled by

the Front Panel Level Control and the Level Push-buttons on the Re- mote Control. Refer to figures 6, 12 and 13. When the Level Control or Push-buttons are operated, the Front

Panel Information Display will indicate the Volume Level from 0 - 100%. Approximately 3 seconds after making any changes to the Volume Level, the Information Display will return to the previous indication.

Figure 13

Notes: 1. Wait until the Information Display returns to pre- “Volume Level Adjustments” indication before enter- ing any new operational commands.

2.When the Volume Level is 81%, the Rear Panel Vari- able Outputs will be at the same volume level as the Fixed Outputs.

17