McIntosh How to Operate the MCD201, Power On, How to Load a Disc, How to Play a SACD Disc

Figure 1

Figure 2

Figure 3

Figure 5

How to Operate the MCD201

Power On

The Red LED above the STANDBY/ON Push-button lights to indicate the MCD201 is in Standby mode. To Switch ON the MCD201, press the STANDBY/ON Push-button on the Front Panel or the PWR (Power) Push-button on the Remote Control. Refer to figures 6 and 12.

How to Load a Disc

1.Press the OPEN/CLOSE Push-button. The disc tray will slide out allowing a disc to be loaded. Refer to figure 1.

2.Press the OPEN/CLOSE Push-button and the disc tray will close. Refer to

figures 6 and 2. Load-

ing of disc’s Table of Contents (number of tracks and total playing time) will be indicated on the Front Panel Information Display. Depending on the type of disc (SACD, CD or

MP3), it may take up to 30 seconds to read the Table of Contents (TOC). Refer to figures 3 and 4.

Figure 4

Note: When a Disc is placed in the tray and the PLAY Push- button is pressed, the tray will close and the first track will start playing.

The Disc will start play- ing the first track of the SACD Layer.

To change from the

default SACD Layer to CD Layer, with the disc stopped (press the STOP Push-button if the disc is playing) press the SACD/CD Push-button on the Front Panel or Remote Control. Refer to figures 6 and 7.

Figure 7

The Player will load the CD Table of Contents (Num- ber of tracks and Total Playing Time) at this time. To start playing the CD Layer press the PLAY Push-button.

Notes: 1. Changing between the layers can be accomplished at any time by performing the above procedure.

2.Some SACD Disc(s) have the ability of display- ing the Album Title and Artist by pressing the MNU/TEXT Push-button after the SACD Table of Contents is read. Refer to figure 8.

3.In a similar manner, some SACD Disc(s) have the

Figure 8

ability of displaying the Track Title by pressing the MNU/TEXT Push-button after the Track has started to play. Refer to figure 9.

4. The Text Display Mode may be canceled by press-

How to Play a SACD Disc

With a disc already loaded into the MCD201, press the PLAY Push-button on the Front Panel of the MCD201 or Remote Control. Refer to figure 5.

Figure 6

Figure 9

16