McIntosh owner manual How to Operate the MCD201, con’t, MP3 Disc Playback

How to Operate the MCD201, con’t

Playback Mode Feature can be activated.

2.When programming Hybrid SACD Discs, first choose the layer (SACD or CD) so the correct TOC can be read, as some discs have different selections for the SACD and CD Tracks.

1.Press the PGM (Program) Push-button to access the Program Mode. Refer to figures 12 and 19.

Figure 19

2.Enter the first desired selection using the Numeric Push-buttons. Refer to figures 12 and 20.

Figure 20

3.In a similar manner, enter the remaining Tracks. Refer to figures 21 and 22.

Figure 21

Figure 22

Notes: 1. The CLEAR Push-button may be used to delete programmed track(s), starting with the track entered last.

2.To cancel a Program before starting playback of the Program, press the STOP Push-but- ton.

4.To start playback of the just entered program, press the PLAY Push-button. The Repeat Mode can be activated to provide continuous playback of the Pro- grammed Track(s). Refer to figure 23.

Figure 23

Note: To momentarily stop playback, press the PAUSE Push-button. To resume Program Playback press the PLAY Push-button.

5. To cancel the Program Playback Mode either press the STOP Push-button followed by pressing the PGM (Program) Push-button or press the STOP Push-button twice.

6.Once the Program Playback Mode is active, tracks may be added

by first pressing the STOP
Push-button followed by enter-
ing the additional tracks using
the Numeric Push-buttons. Then
press the PLAY Push-button to
resume Program Playback Mode.
7. If you would like to delete a
track(s) once the Program Play-
back Mode is active, first press
the STOP Push-button followed
by pressing the CLEAR Push-but-
ton until the desired track is re-
moved. The MCD201 removes the
last track entered first, followed
by the second last track, etc. Any
new tracks may be added by using
the Numeric Push-buttons. Then
press the PLAY Push-button to	Figure 12
resume Program Playback Mode.

MP3 Disc Playback

The MCD201 has the ability of playing back MP3 encoded discs. MP3 allows more tracks on the Disc by using the technique of lossy compression applied to the original audio information. The MP3 Track has lower audio qual- ity than the original recording. Load a MP3 disc into the MCD201. Refer to figure 24.

Figure 24

1.Press the PLAY Push-button to start Playback. Refer to figure 25. After all the tracks have been played the MCD201 will stop.

Note: MP3 Discs will only indicate the elapse time and remaining time for each track as it is playing.

Figure 25

19