PC-CARD-DAS16/12AO User's Guide | | Installing the PC-CARD-DAS16/12AO |
C50FF-x | | | | | | | | | | |
2 | | | | 1 | The red stripe | 2 | | | | 1 |
| | | identifies pin # 1 | | | | | |
| | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
50 | | | | 49 | 50 | | | | 49 |
| | | | |
| | | | | | | |
50-pin female | 50-pin female |
IDC connector | IDC connector |
Figure 8. C50FF-x cable
Details on the C50FF-x cable are available on our web site at
www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=104&pf_id=136.
Field wiring and signal termination
You can use the following cabling, screw termination, and signal conditioning products with the CPCC-50F-39 cable, or with the CPCC-50M-4 and C50FF-x cables:
CIO-MINI50 – 50-pin screw terminal board. Details on this product are available on our web site at www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=102&pf_id=258.
SCB-50 – 50 conductor, shielded signal connection/screw terminal box provides two independent 50-pin connections. Details on this product are available on our web site at www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=196&pf_id=1168.
Information on signal connections
General information regarding signal connection and configuration is available in the Guide to Signal Connections (available at www.mccdaq.com/signals/signals.pdf).
Calibrating the PC-CARD-DAS16/12AO
The PC-CARD-DAS16/12AO features auto-calibration with InstaCal. Calibration coefficients for each range are stored on board in nonvolatile RAM. The normal calibration interval is once per year.
