Meco 7652K1, 7652K5, 7652K6 manual Tools, Item 2B

TOOLS: or and/or

STEP 1- Leg/Side Table Assembly

		(ITEM 3 or 3A) Fixed Leg
(ITEM 2 or 2A	(ITEM 2B)
Side Table	Side Table	(ITEM 4 or 4A) Wheel Leg

(ITEM 5) 1/4-20 x 1 3/8” Bolt (ITEM 5A) 1/4-20 x 1” Bolt

·Lay Side Tables upside down on a flat surface. Side tables will fit on either side of grill.

·Attach the two Fixed Legs to one Side Table. Align four recessed holes of a Fixed Leg with four inserted holes in a Side Table. The four large recessed holes in the Fixed Leg should face away from Side Table. Attach four 1/4 -20 Bolts (Item 5 or 5A) through each Fixed Leg into the threaded holes in the Side Table. Do not tighten bolts completely. (NOTE: For easier alignment and further assembly, final tightening of all bolts will be completed in Step 6).

·Attach the two Wheel Legs to the second Side Table the same way. (Wheel Leg is the short leg with a large axle hole at one end.)

Recessed

holes face out

(ITEM 4) Fixed Leg

(ITEM 3) Wheel Leg

with Axle hole

Wood Side

Table/Legs

5