STEP 5-Hood Handle Assembly

(ITEM 17) Bolt, 6mm x 90 mm

(ITEM 19) Handle Spacer (ITEM 18 or 18A) Hood Handle

·Open Hood and lay it on on its backside.

·Insert 6 mm x 90 mm Bolt through recessed hole of Hood Handle, through Handle Spacer through a hole in Hood. (Note: Wide end of Handle Spacer goes against the Hood.)

·Attach a 6mm Washer and Locknut to the Bolt from inside Hood. Do not over tighten; it may crack the Hood finish.

·Repeat for other end of Handle.

(ITEM 14) Washer 6 mm

(ITEM 16) Locknut 6mm

Assembled Handle

STEP 6-Grill Body/Cart Assembly (Continues on next page)

Assembly of Grill Body will require two people.

(ITEM 11 or 11A) Body Assembly

(ITEM 17) Bolt, 6mm x 90 mm

(ITEM 17A) Bolt, 6mm x 110 mm

 

(ITEM 20) Body Spacer

9

(ITEM 21) Wingnut, 6mm

 

Page 9
Image 9
Meco 7652K5, 7652K6, 7652K1 manual