general setup

Video

There are four items that can be set from the Video menu: TV

Input, Channel Scan, Add/Del Channel and Screen Format.

1. TV Input – Select CATV if you have cable television, otherwise choose TV if the unit is connected to an antenna.

2. Channel Scan – Select START to start automatically searching for stations.

3. Add/Del Channel allows you to add/delete specific channels. Move cursor to desired channel; press the ENTER key once to add the channel and again to delete the channel.

4. Screen Format

* 4:3 Letter Box – Select this setting to display a 16:9 format film on a conventional 4:3 television. The picture will be displayed full-width, with black bars on top and bottom.

* 4:3 Pan Scan – Choose this setting to display transmissions in conventional 4:3 format on a 4:3 television. Transmissions in 16:9 format will be displayed full-height (without black bars) but with the sides cut off, however the sidebars of the image will be cropped to fit your screen.

* 16:9 Wide – This is the setting for output on a wide- screen television in 16:9 format.

Audio

Use this menu to ensure the audio output format is compatible with connected devices (amplifier/receiver or TV set).

1. Dolby Digital

* PCM: Recorder can output PCM data and play the same audio format as on CDs. Additionally, 2-channel analog audio will output from the amplifier’s audio output jacks.

* Bitstream: Recorder outputs raw data of Dolby® Digital soundtracks

2.DTS

* PCM: Recorder can output PCM data and play the same audio format as on CDs. Additionally, 2-channel analog audio will output from the amplifier’s audio output jacks.

* Bitstream: Recorder outputs raw data of DTS® soundtracks

34

MD 80137 Digital DVD Recorder

 

and Player User’s Manual