troubleshooting
Problem
Possible Cause |
| Solution |
|
|
|
Unit doesn’t record.
Audio or subtitle language is not the one selected during the initial setup.
Menus are in the wrong language.
Audio or subtitle language can not be changed.
The video image brightness fluctuates during playback.
Cannot fast scan during playback of DVD movie.
Edited titles/chapters do not show up when played on another DVD player
Disc is full.
Source disc is copy- protected.
Power interruption during the recording.
There are 2 scheduled recording programs running at the same time.
Disc format is not correct.
The selected language does not exist in the disc.
Wrong language set for OSD.
The disc contains only one language.
Some discs only allow the audio and subtitle language to be set in the DVD menu - not with the AUDIO and SUBTITLE buttons on the remote control.
The DVD recorder is connected to the television via a VCR.
Some discs may have sections which prohibit skip or scan operations by users.
Disc has not been made compatible.
Confirm the available space on the disc.
Confirm the recording source has no copyright protection.
None.
Check the recording schedule and cancel one of the scheduled recordings (see page 39).
This DVD recorder can record only to DVD+R or DVD+RW discs (see page 37).
Select another language using AUDIO, SUBTITLE or the DVD menu.
Check the OSD language setting (see page 23).
Check the disc language contents.
Press the MENU button on the remote control to access the DVD menu.
Connect the DVD recorder directly to the TV, bypassing the VCR.
None.
See page 45 for instructions on making a disc compatible.
48 | MD 80137 Digital DVD Recorder |
| and Player User’s Manual |