Problem

troubleshooting

Possible Cause

 

Solution

 

 

 

Unwanted mosaic- like display during playback.

No sound.

No video/picture.

Remote control does not work.

Does not play, even when a title is selected.

Can not play a disc recorded on this DVD recorder on another DVD player.

Poor disc.

Video CD (MPEG1).

DVD player is set to slow or fast playback.

Audio terminals are not connected.

TV volume is too low.

Wrong AUDIO OUTPUT setting.

TV is not connected properly.

Wrong setting for

VIDEO OUTPUT.

No batteries in remote control.

Dead batteries.

Remote control not being pointed at the remote sensor.

Prohibited by the parental controls.

Disc is not finalized.

Disc is one-time only.

Other DVD player can not play DVD+R or DVD+RW discs.

Other DVD player can not calibrate because disc has too little data.

Replace disc.

Playback with DVD format.

Press PLAY to resume normal playback.

Check audio connections (see pages 11-17).

Adjust TV volume.

Check AUDIO OUTPUT settings (see page 34).

Check video connections (see pages 11-17).

Press SETUP and check the Video Output settings (see page 34).

Put in new batteries (see page 20).

Replace batteries (see page 20).

Point the remote control at the remote sensor (see page 20).

Confirm the parental controls setting (see page 35).

Finalize the disc (see pages 45).

If a disc is recorded with content which is available to be copied one time only, it can’t be played on another DVD player.

Check the manual of the other DVD player.

Try a disc with a larger amount of video data recorded to it.

MD 80137 Digital DVD Recorder

47

and Player User’s Manual