PREPARING THE OVEN
Each individual oven is checked at the factory, but for safety’s sake, after unpacking the oven, you should check carefully that it has not been damaged during transport. Check whether there is any visible damage (e.g. in the form of dents or similar), if the door closes properly, and if the hinges are in order. If it appears that the oven has been damaged, you must contact the shop where you bought it, and do not use it until it has been checked by an authorised specialist.
•You should check before installation that all packaging materials have been removed from the oven both inside and outside.
•Ensure that the oven is positioned correctly (see the safety measures above).
•Plug in.
The heating elements were oiled during manufacture and these will therefore smoke slightly when the oven is first used. This is entirely safe and will stop after a few minutes.
However, so that the food does not taste of this smoke, we recommend that you take the following action before using the oven for the first time:
•Leave the oven door ajar.
•Set the function selector so both the top and bottom heating elements are active.
•Set the oven temperature to 250° C, and leave it on for 15 minutes.
The smoke will now have completely disappeared, and you can use the oven to cook food.
OPERATING THE OVEN
Ordinary cooking
1.Place the food in the oven.
2.Close the glass door (6).
3.Select the required heat distribution using the function selector (3).
4.Turn the temperature selector (1) in a clockwise direction to select the required oven temperature.
5.Set the timer (4) to the required cooking time. The oven switches on when the timer is activated. The indicator light (2) stays on until the oven reaches the required temperature.
6.
Cooking using the grill function
1.Place the food in the oven.
2.Leave the glass door (6) ajar.
3.Turn the function selector (3), so the top element is selected.
4.Set the temperature selector (1) to 250° C.
5.Set the timer (4) to the required cooking time.
6.
After use
•Switch the oven off after use, and let it cool down completely.
•Set the function selector to position 0.
•Remove the plug from the socket.
CLEANING
When cleaning the oven, you should pay attention to the following points:
•Remove the plug from the wall socket and allow the oven to cool down before cleaning.
•Never use scouring powder, steel scourers or other strong cleaning agents to clean the interior or exterior surfaces of the oven, as they may scratch the surfaces.
15
