Electrolux EWT113, EWT904 What To Do After You Have Finished Your Washing, Cleaning The Dispenser

Models: EWT704 EWT113 EWT904

1 31
Download 31 pages 28.36 Kb
Page 22
Image 22

CARE AND CLEANING

What To Do After You Have Finished Your Washing.

Rotate Selector knob to “O” position.

Switch off the electricity at the power point.

Turn off the water taps.

Leave lid open for a while. This allows time for moisture inside the washing machine to evaporate and for any odours to disperse.

You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work.

Cleaning The Dispenser

The dispenser needs to be cleaned regularly, preferably after each wash. Inspect the dispenser after each wash to see if there is any residue of detergent.

To do this proceed as follows:

Pull the dispenser drawer forward until it stops.

Lift the front of the drawer up and forward to remove it from the runners.

Clean the dispenser drawer with hot water and a brush, eg. an old toothbrush.

Dry the drawer.

Before replacing the dispenser back in its recess, clean the inside of the drawer with an old toothbrush.

Put the dispenser back into its runners and close the drawer.

Cleaning The Lint Filter

Lint is a collection of threads and fluff which comes off your clothes during washing.

Your washing machine collects this lint in the lint filter. It is important to clean out this lint filter, preferably after each wash.

How to clean the lint filter :

Remove the filter column from the centre of the agitator.

22

Page 22
Image 22
Electrolux EWT113 What To Do After You Have Finished Your Washing, Cleaning The Dispenser, Cleaning The Lint Filter